Troubleshooting Error Codes
IOLMaster 700
1009
An error occured during uploading a
scanpattern-file into
the device-head.
1010
A specific scanpattern expected to be
loaded onto the device-head
is either not present there or is out of
date.
1011
A CsaPixyException has been catched and
rethrown as HalException.
The origign exception is provided as
InnerException of the HalException.
This error is a PI-fault.
- Change the PI or repair the connection
1012
Not used until yet (similar to
CsaPixyError).
1013
Indicates that a chinrest-moving-
command cannot be executed because a
required reference-drive of the chinrest
has not completed yet.
1014
The requested command cannot be
excuted because HAL is in faulted
state due to a preceeding HAL-error.
1015
The requested command cannot be
excuted because the HAL has not been
initialized until yet.
1016
The caller tried to initialize the HAL a
second time although initializing
already has been done or just is in
progress.
1017
A HAL-operation has succeeded, but
within the callers callback-method
occured an exception.
1018
The requested HAL-command is invalid,
invalid at this time or currently
not support. For example calling
'DoSingleOctScan' while in operating-
mode
'Idle' causes this error.
1019
Not used until yet. Would indicate a
overflow of the HAL-command queue.
1020
A HAL-command has neither completed
nor failed within a command-specific
timeout-span. The timeout can be a
execution- or a transmission-timeout.
Service Manual
Confidential and Proprietary
SM-30-4060
Order No. 2075-325
5 - 4
Version 03, 2014-10-13