YOKOGAWA wt3000 Скачать руководство пользователя страница 297

Страница: 297 / 384

10-10

IM 760301-01E

Explanation

The display color for each item can be specified. Set the color using a ratio (0-7) of red

(R), green (G), and blue (B).

• Setting the Graphic Color

Select default color or a user color.

For user color, the display color can be specified for each item.

• Back

Set the background color within the waveform display frame.

• Grid

Set the color of the grid within the waveform display frame and the waveform

display frame.

• Cursor

Set the display color of the cursor.

• U1 to I4, Speed*, and Torque*

Set the display color of the waveform. I3 and Speed are set to the same display

color. The same hold true for U4 and Torque.

Applicable only to products with the motor evaluation function (motor version).

• Setting the Text Color

Select from Preset1 to 3 and user setting.

For user color, the display color can be specified for each item.

• Menu Fore

Set the color of the text on the menu, dialog box, window, and other screens.

• Menu Back

Set the background color of the waveform display frame.

• Select Box

Set the background color of the background within the selected menu frame and

box.

• Sub Menu

Set the display color of the selected dialog box or window.

• Selected Key

Set the display color of the selected soft key or item.

10.6 Setting the Display Color

Содержание wt3000

































































































































































































































































































































































































Результаты поиска

Содержание wt3000

Отзывы:

YOKOGAWA wt3000, Руководство пользователя, Страница: 297 / 384

Результаты поиска

Содержание wt3000

Отзывы: