YOKOGAWA wt3000 Скачать руководство пользователя страница 165

Страница: 165 / 384

5-29

IM 760301-01E

App

Index

Power Measurement

Explanation

The phase difference f between the voltage and current indicates the position of the

current phase with respect to the voltage of each element. You can select the display

mode from below.

• 180 Lead/Lag

If the current phase is in the counterclockwise direction with respect to voltage, the

current is leading (D) the voltage. If the current phase is in the clockwise direction with

respect to the voltage, the current is lagging (G) the voltage. The phase difference is

expressed by an angle between 0 to 180

• 360 Degrees

The phase difference is expressed using an angle between 0 and 360

in the

clockwise direction.

Note

•

If the measured value of the voltage or current input is zero, [Error] is displayed.

•

When both the voltage and current are sinusoids and the ratio of the voltage and current

inputs do not differ greatly with respect to the measurement range, the phase difference

lead and lag are detected and displayed correctly.

•

If the computation result of power factor

exceeds “1,”

is displayed as follows:

•

If the power factor

is greater than 1 and less than equal to 2,

displays zero.

•

If the power factor

is greater than 2,

displays and error.

•

The phase difference, fU and fI, of harmonic order 1 to 100 of the voltage and current on the

harmonic measurement option is always displayed using an angle between 0 and 180

∞

(no

sign for lead and negative sign for lag).

5.10 Selecting the Display Format of the Phase Difference

Содержание wt3000

































































































































































































































































































































































































Результаты поиска

Содержание wt3000

Отзывы:

YOKOGAWA wt3000, Руководство пользователя, Страница: 165 / 384

Результаты поиска

Содержание wt3000

Отзывы: