YOKOGAWA wt3000 Скачать руководство пользователя страница 224

Страница: 224 / 384

7-18

IM 760301-01E

• Turning ON/OFF Cursor Measurement

Press the

Trend Cursor

soft key to select ON or OFF.

If ON is selected, the result of the cursor measurement is displayed.

• Selecting the Target Trend for Cursor Measurement

• Selecting the Target Trend for

Press the

TrendC1 Trace

soft key. A box used to select the target trend

appears.

Press the

cursor keys

to select a value between T1 and T16.

Press

SET

to confirm the new target trend.

• Selecting the Target Trend for Cursor x

Press the

TrendC2 Trace

soft key. A box used to select the target trend

appears.

Press the

cursor keys

to select a value between T1 and T16.

Press

SET

to confirm the new target trend.

• Moving the Cursors

Press the

Trend C1 +/Trend C2 x

soft key to set the cursor target to Trend C1

+, Trend C2 x, or both Trend C1 + and Trend C2 x.

•

If you select Trend C1 +, the position of can be moved.

•

If you select Trend C2 x, the position of cursor x can be moved.

•

If you select both Trend C1 + and Trend C2 x, the two cursors can be moved without

changing the spacing between the two. The value of the digit being specified by Trend

C1 + changes.

Press the

cursor keys

to move the cursor.

7.9 Cursor Measurement

Содержание wt3000

































































































































































































































































































































































































Результаты поиска

Содержание wt3000

Отзывы:

YOKOGAWA wt3000, Руководство пользователя, Страница: 224 / 384

Результаты поиска

Содержание wt3000

Отзывы: