YOKOGAWA wt3000 Скачать руководство пользователя страница 221

Страница: 221 / 384

7-15

IM 760301-01E

App

Index

Trend Display

Explanation

• Selecting Whether to Interpolate the Display

Same as the explanation given in “Selecting Whether to Interpolate the Display” in

section 6.7.

• Changing the Graticule

Same as the explanation given in “Changing the Graticule” in section 6.7.

• Turning ON/OFF the Scale Value Display

Same as the explanation given in “Turning ON/OFF the Scale Value Display” in

section 6.8.

• Turning ON/OFF the Label Display

Same as the explanation given in “Turning ON/OFF the Label Display” in section 6.8.

Note

The settings in this section are common with the waveform display (see chapter 6). Changing

these settings in the trend display also changes the waveform display settings. For example,

if you turn the scale value display OFF in the trend display, the scale value display in the

waveform display is also turned OFF.

7.7 Selecting the Display Interpolation and Graticule and Turning ON/OFF the Scale Value and Waveform Label

Содержание wt3000

































































































































































































































































































































































































Результаты поиска

Содержание wt3000

Отзывы:

YOKOGAWA wt3000, Руководство пользователя, Страница: 221 / 384

Результаты поиска

Содержание wt3000

Отзывы: