YOKOGAWA wt3000 Скачать руководство пользователя страница 198

Страница: 198 / 384

6-17

IM 760301-01E

App

Index

Waveform Display

Explanation

The screen can be evenly divided and the waveforms can be assigned to the divided

windows.

• Selecting the Number of Divisions

Select the number of divisions of the screen from the choices below.

• Single: No division

• Dual:

2 divisions

• Triad: 3 divisions

• Quad: 4 divisions

The number of displayed points in the vertical direction of one divided window varies

depending on the number of divisions as follows:

Single: 432 points, Dual: 216 points, Triad: 144 points, Quad: 108 points

• Waveform Mapping

• Auto

The waveforms that are turned ON (see section 6.1) are assigned to the divided

windows in order by element numbers in the order voltage (U), current (I), Speed,

Torque,

Math1,

and Math2.

*1 Applicable only to products with the motor evaluation function (motor version).

*2 Applicable only to products with the advanced computation (/G6 option). Math waveforms

are displayed only in waveform computation mode.

• Fixed

The waveforms are assigned in order by element number in the order voltage (U)

and current (I) to the divided windows regardless of whether or not the display is

turned ON. Speed

is displayed in the top frame; Torque

is displayed in the 2nd

frame from the top.

The following figure shows how the waveforms are displayed when all 4 elements

are installed, with the motor evaluation function (motor version), the number of

division is 4 (Quad), display of U1, I1, U2, I2, U3, I3, I4, and Torque is ON, and

display of U4 and Speed is OFF.

U1, U3
I1, I3, Torque
U2
I2, I4

U1, U3
I1, I3
U2, I4
I2, Torque

Fixed

Auto

• User

The waveforms can be assigned arbitrarily to the divided windows regardless of

whether or not the display is turned ON. You can select the display position from 0

to 3. The waveforms are assigned in order starting from number 0 from the top

divided window.

User (when the screen is divided into three windows with I1, Speed,
and Torque set to 0, 1, and 3, respectively)

I1, Torque
Speed

0,3
1
2

Displayed in order according

to the specified number.

6.6 Waveform Display on Divided Windows

Содержание wt3000

































































































































































































































































































































































































Результаты поиска

Содержание wt3000

Отзывы:

YOKOGAWA wt3000, Руководство пользователя, Страница: 198 / 384

Результаты поиска

Содержание wt3000

Отзывы: