YOKOGAWA wt3000, Руководство пользователя, Страница: 259 / 384

9-12
IM 760301-01E
Explanation
CAUTION
Do not remove the storage medium (disk) or turn OFF the power when the
access indicator or is blinking. Doing so can damage the storage medium or
destroy the data on the medium.
Setup parameters, waveform display data, numeric data, and waveform sampling data
can be saved.
• Limitation on the Data Save Function by Measurement Modes
There are limitations on the data save function depending on the measurement mode
as follows:
Yes: Can be saved.
No: Cannot be saved.
*1 FFT waveforms are saved as waveform sampling data (Acquisition).
*2 If an item that is not measured or computed in the respective measurement mode is selected,
NAN data is saved.
Yes Yes No No No No
Waveform
sampling data
(Acquisition)
Yes Yes Yes Yes Yes Yes
Yes
*1
Yes No No Yes Yes
Waveform data
(Wave)
Yes Yes Yes Yes Yes Yes
Setup parameters
(Setup)
Harmonics
/G6,/G5
FFT
Voltage
Fluctuation
and Flicker
Cycle by Cycle
Waveform
Computation
IEC Harmonic
Wide Bandwidth
Harmonic
Normal
Measurement
Saved Item
Measurement Mode and Options
/G6 /G6
No
No
No
Yes
/FL
No
Yes
No
Yes
/CC /G6 /G6 None
Numeric data
(Numeric)
*2
• Saving Setup Parameters
Select Setup from the File Item menu to save setup parameters.
• Setup Parameters That Are Saved
The setup parameters of each key existing at the time of the save operation can be
saved. However, setup parameters such as the date, time and communications are
not saved.
• Data Size
The data size of a single set of setup parameters is approximately 20 KB.
• Extension
The .SET extension is automatically added to the file name.
9.3 Saving Setup Parameters, Waveform Display Data, Numeric Data, Waveform Sampling Data