YOKOGAWA wt3000 Скачать руководство пользователя страница 208

Страница: 208 / 384

7-2

IM 760301-01E

Explanation

A display example is shown below. The horizontal axis is expressed in terms of time as

shown below.

Time at the right end of the screen

(time span of the screen)

Time at the left end of the screen

(fixed to 0 s)

• Number of data points displayed in the range

from the left to the right end of the screen

• When "P-P" is displayed, trend is displayed

using P-P compression

(see sections 2.7 and 2.8)

Displayed trend target,

measurement function,

upper limit

Displayed trend target,

measurement function,

lower limit

The trend value in the hold condition (see section 4.11)

is the same as the numeric data when HOLD is pressed.

When hold is released, the trend that was held is displayed.

• Selecting the Display Mode

Select the trend display format from the choices below.

• Displaying the trend on the entire screen

Press the Trend soft key to display the trend on the entire screen.

• Displaying the trend by dividing the display into halves (split display)

• Trend

The numeric data and trend are displayed separately in the top and bottom

windows. For details on how to set the numeric data display, see section 3.15

and chapter 5.

• Wave+Trend

The waveform and trend are displayed separately in the top and bottom

windows. For details on how to set the waveform display, see section 6.

• Bar+Trend

The bar graph and trend are displayed separately in the top and bottom

windows. For details on how to set the bar graph display, see the

Expansion

Function User’s Manual IM760301-51E

Note

Trends are not displayed if wide bandwidth harmonic measurement mode is enabled on

models with the advanced computation (/G6) option.

7.1 Trend Display

Содержание wt3000

































































































































































































































































































































































































Результаты поиска

Содержание wt3000

Отзывы:

YOKOGAWA wt3000, Руководство пользователя, Страница: 208 / 384

Результаты поиска

Содержание wt3000

Отзывы: