YOKOGAWA wt3000 Скачать руководство пользователя страница 203

Страница: 203 / 384

6-22

IM 760301-01E

Explanation

• Turning ON/OFF the Scale Value Display

You can select whether or not to display (ON/OFF) the upper and lower limits of the

vertical axis and the values at the left and right ends of the horizontal axis (time axis,

see section 6.3) of each channel.

• ON

Displays the scale values.

• OFF

Does not display the scale values.

• Turning ON/OFF the Label Display

You can select whether to display waveform labels (input signal names).

• ON

Displays the label name.

• OFF

Does not display the label name.

Time at the right end of the screen

Time at the left end of the screen

Lower limit

Upper limit

Waveform label

6.8 Turning ON/OFF the Scale Value and Waveform Label

Содержание wt3000

































































































































































































































































































































































































Результаты поиска

Содержание wt3000

Отзывы:

YOKOGAWA wt3000, Руководство пользователя, Страница: 203 / 384

Результаты поиска

Содержание wt3000

Отзывы: