YOKOGAWA wt3000 Скачать руководство пользователя страница 149

Страница: 149 / 384

5-13

IM 760301-01E

App

Index

Power Measurement

• Setting the Unit

Press the

cursor keys

to select Unit.

Press

SET

. A keyboard appears.

Use the

keyboard

to set the unit.

For keyboard operations, see section 3.14, “Entering Values and Strings.”

• Setting the Equation

Press the

cursor keys

to select Expression.

Press

SET

. A keyboard appears.

10.

Use the

keyboard

to set the equation.

For keyboard operations, see section 3.14, “Entering Values and Strings.”

Explanation

An equation can be created by combining the measurement function symbols. Using the

numeric values of the measurement functions, the numeric data of the new equation can

be determined. It is convenient to use a USB keyboard (option) when entering an

equation or string with many characters.

• Limitation on the User-Defined Functions by Measurement Mode

There are limitations on the user-defined functions in measurement modes other than

normal measurement mode.

• IEC Harmonics Measurement, Voltage Fluctuation and Flicker Measurement,

and Cycle-by-Cycle Measurement Modes

The user-defined function cannot be used.

• Wide Bandwidth Harmonic Measurement Mode, Waveform Computation

Mode, and FFT Mode

Some operands cannot be computed. For details, see appendix 12.

• Turning ON/OFF the User-Defined Function Computation

You can select whether to perform the specified user-defined function computation.

• ON

Executes the computation.

• OFF

Does not perform the computation.

• Setting the Unit

• Number of Characters

Eight characters or less. However, not all eight characters can be shown on the

numeric data display. This depends on the number of displayed items (see section

5.1).

• Types of Characters

Characters that are displayed on the keyboard and spaces

5.4 Setting the User-Defined Function

Содержание wt3000

































































































































































































































































































































































































Результаты поиска

Содержание wt3000

Отзывы:

YOKOGAWA wt3000, Руководство пользователя, Страница: 149 / 384

Результаты поиска

Содержание wt3000

Отзывы: