YOKOGAWA SA11, Инструкция по эксплуатации, Страница: 9 / 56

IM 12A06S01-00EN-P
9
4 COMMISSIONING OF pH/ORP 22
4.1 Measurement setup 22
4.1.1 Measurement select 22
4.1.2 Temperature settings 22
4.1.3 Temperature compensation 22
4.1.4 Process compensation 23
4.1.5 pH settings 23
4.1.6 ORP settings 24
4.1.7 rH settings 24
4.1.8 Impedance settings 24
4.1.9 Unit conversion 24
4.1.10 Calibration settings for pH/ORP1/ORP2 24
4.2 Communication setup 25
4.3 Error configuration 25
4.4 Logbook configuration 28
5 CALIBRATION OF pH/ORP 29
5.1 Temperature calibration 29
5.2 pH calibration 29
5.2.1 Manual calibration 29
5.2.2 Automatic calibration 30
5.2.3 Sample calibration 30
5.2.4 Fully Automatic calibration 31
5.3 ORP/rH calibration 31
6 OPERATION OF SC (Specific Conductivity) 32
6.1 SA11 quick setup 32
6.2 Measurement setup 32
6.2.1 Parameter setting 32
6.2.2 Temperature setting 32
6.3 Cell constant & polarization 32
6.3.1 Cell constant 32
6.3.2 Polarization 32
6.4 Diagnostics 32
6.4.1 Device state 32
6.4.2 Calibration due 33
6.4.3 Last calibrated 33
6.4.4 Predictive maintenance 33
6.4.5 Sensor wellness 33
6.4.6 Sensor status 34
6.5 Output setup 34
6.6 Calibration and Commissioning 34