YOKOGAWA SA11, Инструкция по эксплуатации, Страница: 10 / 56

IM 12A06S01-00EN-P
10
7 COMMISSIONING OF SC (Specific Conductivity) 35
7.1 Measurement setup 35
7.1.1 Measurement select 35
7.1.2 Temperature settings 35
7.1.3 Temperature compensation 35
7.1.4 Process compensation 35
7.1.5 Concentration 36
7.1.6 USP23 36
7.1.7 SC settings 36
7.1.8 Unit conversion 37
7.1.9 Calibration settings for Conductivity/Resistivity 37
7.2 Communication setup 37
7.3 Error configuration 38
7.4 Logbook configuration 39
8 CALIBRATION OF SC (Specific Conductivity) 40
8.1 Temperature calibration 40
8.2 Cell constant calibration 40
8.2.1 Cell constant (manual) 40
8.2.2 Cell constant (automatic) 40
8.2.3 Sample 41
8.3 Temperature coefficient (TC) 41
9 MAINTENANCE 42
9.1 Periodic maintenance SA11 42
9.2 Periodic maintenance of sensors 42
10 TROUBLESHOOTING 43
10.1 Installation of SA11 43
10.2 Setting of the SA11 43
10.3 Sensor 43
10.4 Application 43
11 APPENDICES 44
11.1 Appendix 1: Factory defaults & setting limits pH 44
11.2 Appendix 2: Buffer tables and matrix compensation pH 46
11.3 Appendix 3: Logbook pH 48
11.4 Appendix 4: Factory defaults & setting limits SC 49
11.5 Appendix 5: Matrix tables and buffer solutions SC 50
11.6 Appendix 6: USP <645> 54
11.7 Appendix 7: Logbook SC 55