manualshive.com logo in svg

YOKOGAWA SA11, Инструкция по эксплуатации, Страница: 5 / 56

Поделиться
Скачать
YOKOGAWA SA11 Скачать руководство пользователя страница 5

IM 12A06S01-00EN-P

5

Warning and Disclaimer

The product is provided on an “as is” basis. YOKOGAWA shall have neither liability nor 

responsibility to any person or entity with respect to any direct or indirect loss or damage 

arising from using the product or any defect of the product that YOKOGAWA cannot predict 

in advance.

SA11

•  The SA11 should only be used with equipment that meets the relevant IEC, American, 

Canadian, and Japanese standards. Yokogawa accepts no responsibility for the misuse of 

this unit.

•  The Instrument is packed carefully with shock absorbing materials, nevertheless, the 

instrument may be damaged or broken if subjected to strong shock, such as if the 

instrument is dropped. Handle with care.

CAUTION  

Electrostatic discharge 

The SA11 contains devices that can be damaged by electrostatic discharge. 

When servicing this equipment, please observe proper procedures to prevent such damage.

CAUTION 

Do not use an abrasive or organic solvent in cleaning the instrument.

CAUTION  

This device is an EN61326-1 Class A product, and it is designed for use in the industrial 

environment. The device however can be used in a laboratory environment too.

CAUTION 

Be careful to touch the concentrated sulfuric acid.

Содержание SA11

























































Отзывы:

Нет отзывов