IM 12A06S01-00EN-P
48
11.3 Appendix 3: Logbook pH
The following table A3.1 shows the stored
logbook events for pH. Each event will be
logged in case of alarm ON and alarm OFF
with time stamp.
Table A3.1: Logbook event list pH
Event name
NVM error
User data CRC error
Factory data CRC error
SA11 not working
temp too high
temp too low
Temp_raw too high
Temp_raw too low
calibration due
Sensor connected to SSA or powered on
ID-chip sync failure
SSA temp out. Design spec
SSA temp out. Operating spec
SENSOR (+ID) detect; when NO ID CHIP
Only possible when sensor without ID is
connected to SSA
Temperature element not detected
pH too high
pH too low
pH temp comp warning
ORP too high
ORP too low
rH too high
rH too low
IMP1 (low) too high
IMP1 (low) too low
IMP2 (low) too high
IMP2 (low) too low
pH_uncomp_too high
pH_uncomp_pH too low
ORP1_uncomp_too high
ORP1_uncomp_too low
ORP2_uncomp_too high
ORP2_uncomp_too low
LE detect
IMP1 glassbreak detect
IMP2 glassbreak detect
The following table A3.2 shows the logbook
for calibration of pH. Each item will be
logged with calibration data and time
stamp.
Table A3.2: Logbook calibration pH
Item
Temp offset
pH ZERO
pH SLOPE
pH ZERO2
pH SLOPE2
ITP
IMP2 after CAL
ORP ZERO
ORP SLOPE
ORP ZERO2
ORP SLOPE2
pH grab offset
ORP1 grab offset
ORP2 grab offset