manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 44 / 442

Поделиться
Скачать
YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 44

Chapter 1  BEFORE USING THE INSTRUMENT 

 

 

1-17

 

Attaching a New Optical Adapter 

 

Refer to the Cautions given on page 1-18. 

 

1.

  Make sure that the power to the instrument is turned OFF. 

  WARNING 

 

Do not replace the optical adapter while the power to the instrument is ON. 

Should the laser emit and enter the eyes, they may be seriously damaged or loss of 
eyesight may result. 

 

 

For the method of turning OFF the power, refer to page 3-107. 

 

2.

  Slide the optical connector cover on the top of the instrument to open it. 

3.

  Insert the new optical adapter straight into the rear shell. 

4.

  Push the optical adapter’s lock lever outward to lock the adapter. 

 

 

 

 

 

 
 

 

 
 

 
 

 

 

Refer 

Refer 

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Отзывы:

Нет отзывов