YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 442

YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 4

CONVENTIONS USED IN THIS MANUAL

III

Conventions Used in this Manual

Safety Graphic Marks

The following graphic marks are given in this manual to ensure the safe use of this
instrument and to prevent injury and property damage. Before operating the instrument,
please read the following carefully to gain thorough understanding.

The following graphic marks indicate the degree of danger and damage that may
occur as a result of improper handling.

WARNING

Indicates a potentially hazardous situation that may possibly result in death or serious injury in the event of
improper handling.

CAUTION

Indicates a potentially hazardous situation that may result in moderate injury or property damage in the
event of improper handling.

The degree of danger and damage is indicated by the following graphic symbols.

“

U

” indicates a warning or caution.

This example indicates fire warning.

“

{

” indicates a prohibited operation.

This example indicates that disassembly is prohibited.

“

z

” indicates an obligatory operation.

This example indicates that the AC adapter must be removed from the power outlet.

«
...
2
3
4
5
6
...
»

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Отзывы:

Нет отзывов