YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 342

Страница: 342 / 442

Chapter 7 USING USEFUL FUNCTIONS

7-47

7.11

Using the Light Source Function

The light source function allows use of the instrument as a light source, not as an OTDR.

This section explains how to use the instrument as a light source.

The instrument cannot be used as a light source if an optical module (AQ7261) is

installed.

The light source wavelength and modulation frequency that can be used vary with

the optical module installed.

They are shown below per available optical module.

For detail on output level, refer to Chapter 9.

I wonder if I could use the

instrument as a light source.

TIP

Refer

Caution

Optical module

Wavelength

Modulation frequency

AQ7261 ----------

-----------------

AQ7264

1310nm, 1550nm

CW, CHOP (270Hz, 1kHz, 2kHz)

AQ7265

1310nm, 1550nm

CW, CHOP (270Hz, 1kHz, 2kHz)

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Результаты поиска

Содержание AQ7260 OTDR

Отзывы:

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 342 / 442

Результаты поиска

Содержание AQ7260 OTDR

Отзывы: