YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 339

Страница: 339 / 442

Chapter 7 USING USEFUL FUNCTIONS

7-44

Analyzing the Subtract Trace

This section explains how to set markers A and B on the subtract trace and calculate the
loss occurring between those marker points.

Locate the cursor to the position to which marker A is to be set.

Press [F3] (MARKER A).

Marker A will appear at the cursor position.

Locate the cursor to the position to which marker B is to be set.

Press [F4] (MARKER B).

Marker B and analysis results will appear at the cursor position.

Marker A:

Marker B:

Subtract trace

dB/km

Distance from distance reference to marker A

Distance from distance reference to marker B

Loss between points A and B on the target trace

Loss per km between points A and B on the target trace

Return loss between points A and B on the target trace

Analyzed by approximate method of reference trace.

It is not possible to save the subtract trace and analysis results.

For details on approximate method, refer to page 3-37.

To clear the markers

1. Press [F5] (MARKER DELETE).

TIP

Refer

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Результаты поиска

Содержание AQ7260 OTDR

Отзывы:

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 339 / 442

Результаты поиска

Содержание AQ7260 OTDR

Отзывы: