YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 214

Страница: 214 / 442

Chapter 3 PERFORMING MEASUREMENTS

3-107

3.10

Turning OFF the Power [Step 9]

Turning OFF the Power

This section explains how to turn OFF the power to the instrument.

Make sure there is no measurement currently in progress.

A message “LASER ON” is displayed during measurement.

For the display in the laser ON , refer to page 3-55.

CAUTION

Before turning OFF the power, make sure that no measurement is in progress.

Turning OFF the power while measurement is in progress may damage the optical module.

WARNING

Before turning OFF the power, make sure that measurement is stopped.

Laser beams are emitted during measurement.

Never stare into the laser. Laser beams are invisible to the naked eye, but if they enter the
eyes, they may cause impaired eyesight.

Press the power switch located on the top of the instrument to turn OFF the

power.

The POWER LED will go out when the power to the instrument is OFF.

If you are operating the instrument by AC power, remove the AC adapter from

the instrument. Also disconnect the power plug from the AC power outlet.

TIP

Refer

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Результаты поиска

Содержание AQ7260 OTDR

Отзывы:

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 214 / 442

Результаты поиска

Содержание AQ7260 OTDR

Отзывы: