YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 112

Страница: 112 / 442

Chapter 3 PERFORMING MEASUREMENTS

3-5

When Using the Battery Pack

•

To prevent trouble with the battery pack, check its appearance periodically for

damage, such as cracks and deformation, and battery fluid leakage.

•

If the charged battery pack is stored for a long period of time, the operating time

will be shortened due to natural discharge.

•

To prevent over discharge, the battery pack must be charged periodically (every

other month).

•

Charging of the battery pack must be performed at temperatures of 5

C to 35

Charging outside this temperature range may not only deteriorate the battery

pack’s performance or shorten its life, but in the worst case may also prevent

charging.

•

If you are not going to use the instrument for a long period of time, the battery

pack must be removed from the instrument. The battery pack must be stored in an

area of low humidity and at a temperature between

−

C and

For the method of charging the battery pack, refer to page 1-19.

Read the “Safety Precautions” given at the beginning of this manual thoroughly

to ensure safety.

Press the power switch located on the top of the instrument to turn ON the

power.

•

The POWER LED will be lit while the power to the instrument is ON.

•

The remaining power in the battery pack can be seen on the power indicator

located in the lower right corner of the screen.

Caution

Refer

TIP

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Результаты поиска

Содержание AQ7260 OTDR

Отзывы:

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 112 / 442

Результаты поиска

Содержание AQ7260 OTDR

Отзывы: