YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 170

Страница: 170 / 442

Chapter 3 PERFORMING MEASUREMENTS

3-63

Locate the cursor to “ON” by using the rotary knob or [

] / [

Press [ENTER] to register the change made to the average measurement

continue setting.

Press [F4] (DONE) to register the changes made to the measurement

conditions.

Press [AVE] to start measurement.

The average measurement continue setting will be retained in the internal memory

even if the instrument is turned OFF. So, when the instrument is turned ON, the

measurement conditions in effect immediately before the instrument was turned

OFF previously will be restored.

Averaging time or averaging interval is displayed, when measurement start.

Refer to the notes given on changing the measurement conditions (page 3-50).

Changing measurement conditions and average measurement again

•

For the method of changing the measurement conditions, refer to page 3-12.

•

For the method of performing average measurement, refer to page 3-56.

Caution

TIP

Refer

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Результаты поиска

Содержание AQ7260 OTDR

Отзывы:

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 170 / 442

Результаты поиска

Содержание AQ7260 OTDR

Отзывы: