manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 160 / 442

Поделиться
Скачать
YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 160

Chapter 3  PERFORMING MEASUREMENTS 

 

 

3-53

 

3.6

 

Setting the File Name/Location to Store the File 
[Step 5] 

If the measured data auto saving function of the measurement condition has been 
enabled, the acquired data is automatically saved when an average measurement is 
completed. So it is necessary to set the file name and to select drive and folder to store 
the data, prior to measurement.

 

 
 

 

•

For the method to enable the measured data auto saving function, refer to page 

3-33. 

•

For the method to set the file name, refer to page 3-96, page 3-103. 

•

For the method to set the location to store the data, refer to page 3-91. 

Refer 

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Отзывы:

Нет отзывов