YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 332

Страница: 332 / 442

Chapter 7 USING USEFUL FUNCTIONS

7-37

Press

[ENTER].

A new window will appear.

For details on the window, refer to page 5-4.

Press [F3] (SECTION ANALYSIS).

Locate the cursor to the point from which section analysis is to be started, and

then press [F1] (START POINT SET).

The S marker will appear at the cursor position.

For the method of moving the cursor, refer to page 3-64.

Locate the cursor to the point at which section analysis is to be stopped, and

then press [F2] (STOP POINT SET).

Marker E will appear at the cursor position.

The total return loss and total loss within the specified section (between the specified
two points) will be displayed.

Refer

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Результаты поиска

Содержание AQ7260 OTDR

Отзывы:

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 332 / 442

Результаты поиска

Содержание AQ7260 OTDR

Отзывы: