manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 163 / 442

Поделиться
Скачать
YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 163

Chapter 3  PERFORMING MEASUREMENTS 

 

3-56

 

Performing Average Measurement 

Average measurement obtains data for each pulse, calculates the mean of the data 
obtained for all the pulses, and then displays it. 

This method improves the signal to noise ratio (S/N), and is effective when you want to 
detect weak signals overwhelmed by noise. 

If “NORMAL” or “Hi-RETURN” has been set for “AVERAGE METHOD”, the attenuation 
that has been set will be disabled since the instrument sets an appropriate attenuation 
automatically and performs measurement. 

 

For details on average method, refer to page 3-30. 

 

1.

 Press 

[AVE]. 

Average measurement will start. 

  WARNING 

 

Do not disconnect the optical fiber from the instrument during measurement.

 

Laser beams are invisible to the naked eye, but if they enter the eyes, they may cause 
impaired eyesight. 

 

Refer 

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Отзывы:

Нет отзывов