YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 14

Страница: 14 / 442

SAFETY PRECAUTIONS

XIII

Restricted and Prohibited Items Regarding Operating Environment and
Conditions

WARNING

Do not insert metal bars or such like into gaps on the instrument.

Doing so may result in fire, electric shock or accident.

CAUTION

Keep the power cord away from heaters etc.

Failure to observe this may result in electric shock.

Do not connect or disconnect the power plug with wet hands.

Doing so may result in electric shock.

Do not place the instrument in humid or dusty areas.

Doing so may result in electric shock or breakdown.

Do not place the instrument on an unstable surface like a shaky table or slope.

The instrument may drop or turn over, causing injury.

Do not place the instrument in areas where there is excessive vibration or impact.

The instrument may drop or turn over, causing injury.

When disconnecting the power cord, always hold the plug and pull it out.

Pulling the power cord may damage the cord, resulting in fire or electric shock.

Do not place the instrument in direct sunlight or in places like inside a car under the very
hot sunshine.

Placing the instrument in such places may cause the temperature inside the instrument to
rise, resulting in breakdown.

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Результаты поиска

Содержание AQ7260 OTDR

Отзывы:

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 14 / 442

Результаты поиска

Содержание AQ7260 OTDR

Отзывы: