YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 333

Страница: 333 / 442

Chapter 7 USING USEFUL FUNCTIONS

7-38

The total return loss is calculated based on the back scatter level at the near end.

However, it can be re-calculated based on the back scatter level at the desired

position (e.g. section analysis start point) instead of the near end.

The method of changing the reference level is explained below.

1.Move the cursor to the point whose back scatter level is to be set as the

reference level.

2.Press [F3] (REFERENCE LEVEL ADJUST).

A new reference level will be set, and the total return loss will be

re-calculated based on this reference level.

For the method of moving the cursor, refer to page 3-64.

To cancel the section analysis setting

1. Press [F4] (SET CLEAR).

Also section analysis setting is canceled, to get out this window (Press [ESC]).

TIP

Refer

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Результаты поиска

Содержание AQ7260 OTDR

Отзывы:

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 333 / 442

Результаты поиска

Содержание AQ7260 OTDR

Отзывы: