YOKOGAWA AQ7260 OTDR Скачать руководство пользователя страница 341

Страница: 341 / 442

Chapter 7 USING USEFUL FUNCTIONS

7-46

Press [F5] (2WAY TRACE).

The following window will appear.

•

The merged trace of the two traces will not be displayed. But all of event maker

displayed on the original direction trace.

•

The merged event list can be saved.

•

The merged event list can be printed.

•

A comment can be added to the merged event list.

•

For the method of saving the event list, refer to page 3-88.

•

For the method of printing the event list, refer to page 3-104.

•

For the method of adding a comment to the event list, refer to page 5-23.

A list of merged events will be shown.

TIP

Refer

Содержание AQ7260 OTDR



























































































































































































































































































































































































































































Результаты поиска

Содержание AQ7260 OTDR

Отзывы:

YOKOGAWA AQ7260 OTDR, Руководство пользователя, Страница: 341 / 442

Результаты поиска

Содержание AQ7260 OTDR

Отзывы: