YASKAWA SGD7C-***AMAA***, Руководство по эксплуатации продукта

Страница: 560 / 669

11.1 List of Servo Parameters
11.1.2 List of Servo Parameters
11-28
Pn595
2
/EXT3 (External Latch
Input 3) Signal Alloca-
tion
0000h to
2019h
–
Axis A:
1008h,
Axis B:
1014h
All
After
restart
Setup –
Pn597
2
FSTP (Forced Stop
Input) Signal Allocation 0000h to
3019h
– 0000h All
After
restart
Setup
page
5-87
Continued on next page.
Continued from previous page.
Parameter
No.
Size
Name
Setting
Range
Setting
Unit
Default
Setting Applicable
Motors
When
Enabled
Classi-
fication
Refer-
ence
n.

XXX
Allocated Pin Number
000 to 005 The signal is always inactive.
006 Allocate the signal to CN1-6.
007 Allocate the signal to CN1-7.
008 Allocate the signal to CN1-8.
009 to 011 The signal is always inactive.
012 Allocate the signal to CN1-12.
013 Allocate the signal to CN1-13.
014 Allocate the signal to CN1-14.
n.X

Polarity Selection
0 The signal is always inactive.
1 Active when input signal is ON (closed).
2 Active when input signal is OFF (open).
n.

XXX
Allocated Pin Number
003 Allocate the signal to CN1-3.
004 Allocate the signal to CN1-4.
005 Allocate the signal to CN1-5.
006 Allocate the signal to CN1-6.
007 Allocate the signal to CN1-7.
008 Allocate the signal to CN1-8.
009 Allocate the signal to CN1-9.
010 Allocate the signal to CN1-10.
011 Allocate the signal to CN1-11.
012 Allocate the signal to CN1-12.
013 Allocate the signal to CN1-13.
014 Allocate the signal to CN1-14.
n.X

Polarity Selection
0
Set the signal to always enable drive (always disable forcing the motor to
stop).
1 Enable drive when the input signal is ON (closed).
2 Enable drive when the input signal is OFF (open).
3 Set the signal to always prohibit drive (always force the motor to stop).