TEAM DIGITAL
1
SC82
Servo Controller
Improving the world of DCC
>
DCC compatible accessory decoder
>
Control 8 servos motors
>
Output status LEDs
>
8 inputs for turnout control
>
16 inputs for semaphore signaling
>
8 configurable routes
>
“Smart” Programming
>
DCC gateway to serial bus
> LocoNet
®
compatible serial bus
Description
The SC82 is a DCC compatible accessory decoder.
It can control up to 8 servo motors that can be used
for switches (turnouts) or semaphores. It can drive
LEDs for turnout state. The inputs can be used for
push buttons to control switches or block detectors to
control semaphores. It has route capability for
multiple turnout control.
The SC82 can be used as a stand-a-lone controller or
communicate with other devices that have a
compatible serial bus.
Using the serial bus, one SC82 could control another.
Push buttons connected to the inputs of one SC82
can control servo connected to another SC82. A route
defined in SC82 could include servos controlled by
another SC82. The serial bus can help in reducing
and simplify the wiring.
The SC82 works out of the box with no
programming. If you you need to change servo
position or addresses its as easy as issuing switch
commands or controlling loco speed. If custom
operation is required, CVs can by programming by
the DCC system.
TEAM DIGITAL, LLC
3111 Timber Valley Dr
Kokomo IN 46902
www.teamdigital1.com
09.01.15
LocoNet is a registered
trademark of Digitrax Inc
PR
EL
IMI
NA
RY
Version C proto hardware shown.
Production hardware has all servo
connectors in one line.
1
1
1
1
Inputs
1 to 8
Inputs
9 to 16
Outputs
9 to 16
Outputs
1 to 8
SC82
LED1
LED2
LED3
Power
Track Power
or DC
9.5 -16 V
Serial Bus
6 pin RJ12
Smart Button
Inputs for:
Push button switch control
Semaphore signaling
Outputs for:
LED indicators
Serial bus used to communicate:
Switch state/control
SG 5V GD
SG 5V GD
1
4
5
8
Outputs for:
Servos
Inputs only for:
Semaphore signaling
