7.6 Debugging Ladder Programs
7.6.2 Register List Panes
7
Cr
eating U
s
er Pr
ogram
s
7-57
2.
Enter the address of the register to display in the
Register
Box. When displaying a list of
D registers, enter the program number as shown below.
3.
When you press the
Enter
Key, the register map will be displayed.
The specified register will be displayed in the top row.
Example of Displaying the D Register Map and Balloon
Example of an M Register Map
Switching the Register Map Display
You can change the number of registers that is displayed in one row. You can use the five but-
tons on the top right to switch the displayed contents of the register map.
Number of registers displayed in one row
Switching Buttons
•
If you move the cursor over the register map, a balloon will show the register and the status
of the register at the cursor position.
•
You can change the number of registers displayed in one row. The five buttons on the top
right of the pane are used to switch the displayed contents.
•
If you right-click the register list, you can select
Decimal
,
Hex
,
Binary
,
or
ASCII
from the
pop-up menu to change the data type of the values. However, the B and F data types can-
not be changed.
•
The display color alternate between blue and black for every other row.
•
The
Monitor
Icon is enabled only when the SERVOPACK is online.
Information
Number of registers displayed in one row
