YASKAWA MOTOWELD-E500-6N3, Инструкция по эксплуатации

Страница: 81 / 115

HW0482309
81
13.2
Adjustment of Starting Characteristic
13.2.1
Adjustment of Starting Pulse
These parameters can change the characteristics related to the first arc start at ARCON
signal.
Parameter
No.
Meaning Guideline of Adjustment
P00
Wire speed until the wire contacts the
base metal.
-
When scrap of the wire tip end remains:
Decrease the value.
-
When arc does not start: Increase the
value.
P01
Wire speed from when the wire
contacts the base metal until arc starts. - For excessive repelling at arc start:
Decrease the value.
- For arc burning at arc start:
Increase the value.
P02
Peak value of pulse current that flows
for arc start
P04
Peak time of pulse current that flows
for arc start
- For excessive repelling at arc start:
Increase the value.
- For arc burning at arc start:
Decrease the value.
Wire slow-down speed
I
t
スタートパルスピーク電流
スタートパルスピーク時間
Hot conditions
Hot conditions
Wire speed at start
P00 P01
P02
P04
Starting pulse peak current
ARCON signal
Starting pulse peak time