manualshive.com logo in svg

YASKAWA JEPMC-MP2300S-E, Руководство пользователя

Поделиться
Скачать
YASKAWA JEPMC-MP2300S-E Скачать руководство пользователя страница 54

2.2  Basic Module

2.2.5  Built-in SVB Module

2-30

2.2.5  Built-in SVB Module

( 1 ) Overview

[ a ] About SVB Module

The SVB Module is a motion module used to control SERVOPACKs, stepping motor drivers, inverters, distributed I/O 
devices, etc. via MECHATROLINK interface MECHATROLINK-I or -II.
The MECHATROLINK-II enables position, speed, torque, and phase control for highly accurate synchronized control. 
In addition, sophisticated machine operations can be performed by switching the control mode while the axis is mov-
ing. 

[ b ] Built-in SVB and Slot-mounting Optional SVB

The SVB Modules are of two types: The built-in SVB (hereinafter referred to as Built-in SVB) and the Slot-mounting 
Optional SVB (hereinafter referred to as Optional SVB)

A built-in SVB Module

 is incorporated in the MP2300S.

The Optional SVB

 is one of the optional modules for the Machine Controller. The SVB-01 Module is an Optional 

SVB that can be mounted on the optional slot of the MP2300S.

[ c ] Features

• Up to 21 slave stations can be connected to a single Module (the SERVOPACKs can be connected up to 16 

axes). 
MP2300S: Only an SVB-01 Module can be mounted in optional slot.
 

Including the MP2300S’s built-in SVB, a total of 32 axes can be controlled.

• Synchronization between Modules is also supported, making it suitable for both synchronous control and 

interpolation across Modules. 

• An SVB-01 Module used as a slave can be connected to a host controller equipped with MECHATROLINK 

communication functions. 

• Self-configuration enables automatic allocation of setting data for the slave device that is connected to 

MECHATROLINK. 

• SERVOPACK parameters can be managed over networks.
• When using MECHATROLINK-II, MP2300S built-in SVB is available as a slave.

Machine Controller CPU

SVB

MECHATROLINK

Ladder/motion 
program  

Speed control 

Position control 

Phase control 

SERVOPACK 

Torque control 

Position reference 

Speed reference 

Phase reference 

Torque reference 

SERVOPACK 

User application 

Содержание JEPMC-MP2300S-E















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды