3 - 18
BASICS
Chapter 3
Learning the Basics
Quick Edit
Quick-Edit Parameters
The next two pages present brief descriptions of the 16 Quick Edit parameters.
■
EQ LOW
Sets the gain for the low band. (
➝
REFERENCE: 1-51) Raise the slider to increase the
gain value.
■
EQ LO-MID
Sets the gain for the low-mid band. (
➝
REFERENCE: 1-51)
■
EQ HI-MID
Sets the gain for the hi-mid band. (
➝
REFERENCE: 1-51)
■
EQ HIGH
Sets the gain for the high band. (
➝
REFERENCE: 1-51)
■
AT FOLLOW
Sets the speed at which the sound changes in response to changes in aftertouch. Lift
the slider to make the response faster.
■
VEL SENS
Sets the velocity sensitivity — the amount by which velocity can change. Bringing the
slider all the way forward fixes the velocity at “96”; velocity cannot change, so there
are no velocity-related sound changes. If the slider is at the center position, the VP1
uses the voice’s (element’s) preset velocity sensitivity. Raising the slider above the
midpoint further increases the degree of velocity change, resulting in greater velocity-
induced sound change.
■
POR TIME
Adjusts the voice’s (element’s) portamento time setting. Raise the slider to extend the
time.
■
EF DEPTH
Adjusts the return-from-effects level. (
➝
REFERENCE: 1-41) Pushing the slider
upward raises the return level, increasing the impact of the effects.
■
LFO DEPTH
Adjusts the voice’s (element’s) LFO amplitude setting. Raise the slider to increase the
oscillation amplitude.
■
LFO SPEED
Adjusts the voice’s (element’s) LFO speed setting. Raise the slider to increase the
oscillation speed.
Содержание VP1
