Yamaha Tenere 700 2020, Руководство по обслуживанию

Страница: 333 / 472

SIGNALING SYSTEM
8-22
NG
→
OK
↓
The brake light fails to come on.
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
The turn signal light, turn signal indicator light or both fail to blink.
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
2. Check the entire signaling system
wiring.
Refer to “CIRCUIT DIAGRAM” on
page 8-19. Properly connect or replace the wiring har-
ness.
Replace the horn.
1. Check the front brake light switch.
Refer to “CHECKING THE
SWITCHES” on page 8-129. Replace the front brake light switch.
2. Check the rear brake light switch.
Refer to “CHECKING THE
SWITCHES” on page 8-129. Replace the rear brake light switch.
3. Check the entire signaling system
wiring.
Refer to “CIRCUIT DIAGRAM” on
page 8-19. Properly connect or replace the wiring har-
ness.
Replace the tail/brake light.
1. Check the turn signal light bulbs
and sockets.
Refer to “CHECKING THE BULBS
AND BULB SOCKETS” in “BASIC
INFORMATION” (separate volume).
Replace the turn signal light bulb(s), sock-
et(s) or both.
2. Check the turn signal switch.
Refer to “CHECKING THE
SWITCHES” on page 8-129.
• The turn signal switch is faulty.
• Replace the left handlebar switch.
3. Check the hazard switch.
Refer to “CHECKING THE
SWITCHES” on page 8-129.
• The hazard switch is faulty.
• Replace the left handlebar switch.
4. Check the turn signal/hazard relay.
Refer to “CHECKING THE RE-
LAYS” on page 8-131. Replace the turn signal/hazard relay.