Yamaha Tenere 700 2020, Руководство по обслуживанию

Страница: 328 / 472

LIGHTING SYSTEM
8-17
EAS30499
TROUBLESHOOTING
Any of the following fail to light: headlight (high beam), headlight (low beam), auxiliary light, license plate
light, taillight, meter light or high beam indicator light.
TIP
• Before troubleshooting, remove the following part(s):
1. Rider seat
2. Tail cover
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
1. Check the license light bulb and li-
cense light bulb socket condition.
Refer to “CHECKING THE BULBS
AND BULB SOCKETS” in “BASIC
INFORMATION” (separate volume).
Replace the bulb and bulb socket.
2. Check the fuses.
(Ignition, signaling system, head-
light and main)
Refer to “CHECKING THE FUS-
ES” on page 8-130.
Replace the fuse(s).
3. Check the battery.
Refer to “CHECKING AND
CHARGING THE BATTERY” on
page 8-130. • Clean the battery terminals.
• Recharge or replace the battery.
4. Check the main switch.
Refer to “CHECKING THE
SWITCHES” on page 8-129. Replace the main switch/immobilizer unit.
5. Check the dimmer switch.
Refer to “CHECKING THE
SWITCHES” on page 8-129.
• The dimmer switch is faulty.
• Replace the left handlebar switch.
6. Check the pass switch.
Refer to “CHECKING THE
SWITCHES” on page 8-129.
• The pass switch is faulty.
• Replace the left handlebar switch.
7. Check the entire lighting system
wiring.
Refer to “CIRCUIT DIAGRAM” on
page 8-15. Properly connect or replace the wiring har-
ness.
Replace the meter assembly, headlight
assembly or tail/brake light.