Using the Arpeggio Function
MOTIF-RACK XS Owner’s Manual
42
Basic Structure
Ref
erence
V
oice
Multi
Utility
The Contr
ols &
Connector
s
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quic
k Guide
Appendix
6.
At the “Arp Select” column, select any of “ARP1” –
“ARP5” (five Arpeggio types) assigned to the
current Voice.
You can select and play one of the five Arpeggio types
assigned to each Voice. When you want to change the
settings common to all five Arpeggio types, move the
cursor position to “Arp Edit” then press the [ENTER] button
to call up the Arpeggio Edit display (page 66. When you
want to change the Arpeggio type that is assigned to
“ARP1” for example, move the cursor position to “Arp 1
Type,” then press the [ENTER] button to call up the Arp 1 –
5 Type display.
n
The 8th note icon at left of “ARP1” – “ARP5” indicates that the
Arpeggio type has actually been assigned. No 8th note icon
indicates that no Arpeggio type (“off”) is assigned and no sound is
produced even when you play any note.
7.
Press the [SELECT] button so that the lowest lamp
lights, then turn Knob 5 while playing back the
Arpeggio to adjust the tempo.
8.
After the desired settings are completed, press the
[STORE] button to store the Arpeggio related
settings as User Voice data.
For information about storing the edited Voice, see page
46.
In the Multi mode, an Arpeggio type can be assigned to each
Part and up to four Parts can play back the assigned Arpeggio
types simultaneously. This section explains how to trigger the
Arpeggio types by using the note events in the track of the DAW
software and how to record the MIDI notes generated via
Arpeggio playback to a track in the DAW software.
n
For instructions on connecting the MOTIF-RACK XS to a computer, see
page 17.
1.
On the DAW software, record the note data (for
triggering the Arpeggio) to a certain track, then set
the MIDI output port of the track to USB port 1 or
mLAN port 1.
n
For information about making these settings, refer to the manual of
the DAW software.
2.
On the MOTIF-RACK XS, enter the Multi mode, then
select the desired Multi.
3.
On the MOTIF-RACK XS, set the “Arp Common Sw”
parameter to “on” in the Arpeggio display of the
Common Edit.
When the “Audition Button” parameter (page 99) is set to
“arpeggio sw” in the Utility General window, you can turn
the arpeggio switch parameter on/off by pressing the
[AUDITION] button on the panel. When the arpeggio
switch parameter is set to on, the lamp of the [AUDITION]
button lights.
4.
In the Arp Edit display (page 96) of the Part Edit, set
the “Arp Sw” parameter of the desired Part to “on,”
then select the desired Arpeggio type in the Arp 1 –
5 Type display.
Set the other parameters as desired in the Arpeggio
settings display. The “Arp Sw” parameter can be set to on
for up to four Parts.
5.
In the Voice display (page 94) of the Part Edit, set the
“Receive Ch” parameter of the Part (of which the
“Arp Sw” parameter is set to “on”) to that same as
the Transmit Channel of the track on the DAW
software.
6.
Make desired MIDI clock settings for playing the
Arpeggio.
Determine which clock will be used, the internal clock (of
the MOTIF-RACK XS) or the external clock (from the
separate MIDI device or DAW software/computer), as well
as other settings. For details about these settings, refer to
“Arpeggio tempo” on page 43.
7.
On the DAW software, play the note data to trigger
the Arpeggio of the MOTIF-RACK XS to sound the
Arpeggio set on the MOTIF-RACK XS.
Switching Arpeggio types using Control
Change messages
The Arpeggios 1 – 5 can be also switched from an external
device using Control Change messages.
1.
Press the [UTILITY] button, select “Controller,” press the
[ENTER] button, move the cursor position to “Arp 1-5 Ctrl
No” (Arpeggio 1 – 5 Control Change number), then set the
Control Change number you want to use for switching
among Arp 1 – 5.
2.
Move the cursor position to “Arp Assign Mode” then
select one of the following values.
inc:
Each time the MOTIF-RACK XS receives a Control Change
message set in Step1, Arpeggios 1 – 5 can be switched in
numerical order. The actual Control Change value does not matter.
direct:
You can select the Arpeggio number (ARP1 – ARP5)
corresponding to the value of the Control Change message that is
set in Step1. For details, see page 102.
3.
Try transmitting the Control Change message to the
MOTIF-RACK XS from the external MIDI device to change
the Arpeggio number (ARP1 – ARP5).
Select one of “ARP1” – “ARP5.”
Calls up the Arpeggio
Edit display.
Calls up the Arpeggio Type
Select display.
TIP
Arpeggio playback/recording in the Multi
mode
Содержание Motif-Rack XS
Страница 1: ...EN TONE GENERATOR OWNER S MANUAL ...