Power-on Procedure
MOTIF-RACK XS Owner’s Manual
14
Basic Structure
Ref
erence
V
oice
Multi
Utility
The Contr
ols &
Connector
s
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quic
k Guide
Appendix
Once you’ve made all the necessary connections (pages 13 and
21) between your MOTIF-RACK XS and any other devices, make
sure that all volume settings are turned down all the way to zero,
then turn on each device in order: first, MIDI masters (senders),
MIDI slaves (receivers), then audio equipment (mixers,
amplifiers, speakers, etc.). This ensures smooth signal flow from
the first device to the last (first MIDI, then audio).
n
To turn off the power to the devices, first lower the volume of the audio
equipment, then turn off the power in the reverse sequence.
To protect your speakers, before you turn the power to the
MOTIF-RACK XS on or off, lower the volume setting on the
MOTIF-RACK XS and connected audio equipment.
1.
Turn the [VOLUME] knob from the STANDBY
position to the ON position to turn the power on.
The opening message appears in the LCD. After a while,
the default display appears.
n
You can set the default display in the “Power On Mode” parameter
([UTILITY]
→
General window). For details, see page 98.
n
If the LCD is difficult to read, you may need to adjust the display
contrast. To do this, simultaneously hold down the [UTILITY] button
and turn the Encoder knob.
2.
Raise the sound system volume to a reasonable
level.
3.
Turn the [VOLUME] knob clockwise to set an
appropriate volume level.
4.
When you want to turn the MOTIF-RACK XS off,
first turn down the volume of all the connected
audio equipment then turn the power to each
device off.
Power-on Procedure
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
L
R
POWER
ON!!
MIDI master (transmitting device)
MOTIF-RACK XS as MIDI slave
(MIDI receiving device)
Audio equipment
(mixer first, then amplifier)
Turning the Power On/Off
CAUTION
Содержание Motif-Rack XS
Страница 1: ...EN TONE GENERATOR OWNER S MANUAL ...