Multi Mode
MOTIF-RACK XS Owner’s Manual
94
Basic Structure
Ref
erence
V
oice
Multi
Utility
The Contr
ols &
Connector
s
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quic
k Guide
Appendix
Part Edit
Part Edit lets you edit the parameters of the individual Parts that make up a Multi.
Procedure
[MULTI]
➝
Select Multi programs
➝
[EDIT]
➝
Select the desired Part “1” – “16” in the Multi Edit Select display
➝
[ENTER]
➝
Select the desired display in the Multi Part Edit Select display
➝
[ENTER]
➝
Edit display
1
Voice
Bank
Number
Determines the Voice assigned to the current Part by specifying the Voice Bank and Number.
Param. with Voice
(Parameter with Voice)
Determines whether or not the following parameter settings of the selected Voice are copied from
the Voice to the current Part when you change a Voice for the current Part individually.
• Arpeggio settings
• Filter Cutoff Frequency
• Filter Resonance
• Amplitude EG
• Filter EG
• Pitch Bend Range (Upper/Lower)
• Note Shift
n
Regardless of the Parameter with Voice setting, the following settings are always copied when a Normal Voice is
selected: Mono/Poly, Porta Sw (Portamento Part Switch), Porta Time (Portamento Time) and Porta Mode
(Portamento Mode).
Settings:
off (not copied), on (copied)
Receive Ch
(Receive Channel)
Determines the MIDI receive channel for the selected Part. Since MIDI data may be coming from
many channels at once, you should set this to match the particular channel over which the desired
controlling data is being sent. The MIDI transmit channel for the real-time changing of the Knob-
controlled data is the same as this parameter setting.
Settings:
01 – 16, off
2
Play Mode
Volume
Determines the volume for each Part. Use this parameter to adjust the balance between the current
Part and other Parts. This parameter can be changed directly via the Knob.
Settings:
0 – 127
Pan
Determines the stereo pan position for the Part. This parameter can be changed directly via the
Knob.
Settings:
L63 (far left) – C (center) – R63 (far right)
n
Note that this Part Pan parameter may have little or no audible effect if the Pan for a specific Element is set to the
left position and the Pan for another Element is set to the right position.
Voice Elm Pan
(Voice Element Pan)
Determines whether the individual pan settings for each Element (of the Voice assigned to the
selected Part) are applied or not. When this is set to “off,” the pan position for the each Element is
set to center in the Part.
Settings:
on, off
Note Shift
Adjusts the pitch of the Part in semitones.
Settings:
24 – +0 – +24
Detune
Adjusts the tuning of the Part in cent increments.
Settings:
-12.8Hz – +0Hz – +12.7Hz
PB Range Upper
(Pitch Bend Range Upper)
PB Range Lower
(Pitch Bend Range Lower)
Determines the maximum Pitch Bend range in semitones. Setting the Upper parameter to +12 would
result in a maximum pitch rise of one octave when the Pitch Bend wheel is moved upwards. On the
other hand, a Lower setting of -12 would result in the pitch being lowered up to a maximum of one
octave (12 semitones) when the Pitch Bend wheel is moved downwards.
Settings:
-48 semi – +0 semi – +24 semi
Multi Play display
Multi Edit Select display
Multi Part Edit Select display
Edit display
(example: Voice display)
Содержание Motif-Rack XS
Страница 1: ...EN TONE GENERATOR OWNER S MANUAL ...