manualshive.com logo in svg

Yamaha Motif-Rack XS, Руководство пользователя

Yamaha Motif-Rack XS - универсальный синтезатор в формате раковины, предлагающий бесконечные возможности музыкального творчества. Проверьте Code List и скачайте руководство пользователя бесплатно на manualshive.com. Погрузитесь в мир звука с Yamaha Motif-Rack XS.

Поделиться
Скачать
background image

MOTIF-RACK XS Owner’s Manual

5

• Before connecting the instrument to other electronic components, turn off the 

power for all components. Before turning the power on or off for all 
components, set all volume levels to minimum. Also, be sure to set the volumes 
of all components at their minimum levels and gradually raise the volume 
controls while playing the instrument to set the desired listening level.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, 

solvents, cleaning fluids, or chemical-impregnated wiping cloths.

• Do not insert a finger or hand in any gaps on the instrument. 

• Never insert or drop paper, metallic, or other objects into the gaps on the panel. 

If this happens, turn off the power immediately and unplug the power cord from 
the AC outlet. Then have the instrument inspected by qualified Yamaha service 
personnel. 

• Do not place vinyl, plastic or rubber objects on the instrument, since this might 

discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not 

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a 

high or uncomfortable volume level, since this can cause permanent hearing 
loss. If you experience any hearing loss or ringing in the ears, consult a 
physician.

Saving and backing up your data

For instruments with DRAM (RAM that does not retain data)

• DRAM data (see page 48) is lost when you turn off the power to the instrument. 

Save the data to the flash ROM (see page 48)/ external device such as a 
computer.

Saved data to the flash ROM may be lost due to malfunction or incorrect 
operation. Save important data to external device such as a computer.

• Never attempt to turn off the power while data is being written to Flash ROM

(while an “Executing...” or “Please keep power on” message is shown). Turning 
the power off in this state results in loss of all user data and may cause the 
system to freeze (due to corruption of data in the Flash ROM). This means that 
this tone generator may not be able to start up properly, even when turning the 
power on next time.

Backing up the external media

• To protect against data loss through media damage, we recommend that you 

save your important data onto two external media.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

Even when the power switch is in the “STANDBY” position, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long 
time, make sure you unplug the AC power adaptor from the wall AC outlet.

About the latest Firmware Version

Yamaha may from time to time update firmware of the product and the other associated software without notice for improvement. We recommend that you check 
our web site for later releases and upgrade your firmware of the MOTIF-RACK XS or the associated software.

http://www.yamahasynth.com/

Note that the explanations in this Owner’s Manual apply to the version of firmware when this Owner’s Manual was produced. For details about the additional 
functions due to later releases, refer to the above website.

Connections

Maintenance

Handling caution

Saving data

(3)-11

 2/2

Содержание Motif-Rack XS























































































































Отзывы:

Нет отзывов

Похожие инструкции для Motif-Rack XS

Raymarine SeaTalk2 Owner'S Handbook Manual preview
SeaTalk2
Бренд: Raymarine Страницы: 12
Dodge 8W-30 Wiring Diagram preview
8W-30
Бренд: Dodge Страницы: 24
Ultrasport NavCom 400 User Manual preview
NavCom 400
Бренд: Ultrasport Страницы: 94
Sandstrom SKBTPB17E Instruction Manual preview
SKBTPB17E
Бренд: Sandstrom Страницы: 56
cefar ACTIV XT User Manual preview
ACTIV XT
Бренд: cefar Страницы: 148
KeySonic KSK-6231INEL Manual preview
KSK-6231INEL
Бренд: KeySonic Страницы: 12
A4Tech GR-54 User Manual preview
GR-54
Бренд: A4Tech Страницы: 8
Laser Gaming KBX-SRMKM-937 Manual preview
KBX-SRMKM-937
Бренд: Laser Gaming Страницы: 9
Energetics TZ-2176 Owner'S Manual preview
TZ-2176
Бренд: Energetics Страницы: 44
Mi-one Mi-pod Pro User Manual preview
Mi-pod Pro
Бренд: Mi-one Страницы: 8
Samsung EJ-CT800 User Manual preview
EJ-CT800
Бренд: Samsung Страницы: 14
Samsung BKB-10 Quick Manual preview
BKB-10
Бренд: Samsung Страницы: 3
Samsung A3LBKB-A User Manual preview
A3LBKB-A
Бренд: Samsung Страницы: 22
Samsung EF-DT500 Instructions Manual preview
EF-DT500
Бренд: Samsung Страницы: 39
Samsung EE-BT550 Manual preview
EE-BT550
Бренд: Samsung Страницы: 37
Samsung EJ-BT230 Manual preview
EJ-BT230
Бренд: Samsung Страницы: 55
Samsung EBE0388137D7 Manual preview
EBE0388137D7
Бренд: Samsung Страницы: 56
Samsung EJ-FT830 Quick Start Manual preview
EJ-FT830
Бренд: Samsung Страницы: 79

Бренды по названию

Популярные бренды

Загрузить еще бренды