manualshive.com logo in svg

Yamaha Motif-Rack XS, Руководство пользователя

Yamaha Motif-Rack XS - универсальный синтезатор в формате раковины, предлагающий бесконечные возможности музыкального творчества. Проверьте Code List и скачайте руководство пользователя бесплатно на manualshive.com. Погрузитесь в мир звука с Yamaha Motif-Rack XS.

Поделиться
Скачать
background image

Utility

MOTIF-RACK XS Owner’s Manual

98

Basic Structure

Ref

erence

V

oice

Multi

Utility

The Contr

ols & 

Connector

s

Setting Up 

Listening to

the Sound

Connections

Using a Computer

Quic

k Guide

Appendix

In the Utility parameters, you can set parameters that apply to the entire system of the MOTIF-RACK XS. Pressing the [UTILITY] 
button in the Voice or Multi mode calls up the relevant Utility parameters of the current mode. Pressing the [EXIT] button returns 
to the original display.

Utility

Procedure

[UTILITY] 

➝

 Select the desired window in the Utility Select window 

➝

 [ENTER] 

➝

 Edit window

1

 General

Volume

Determines the overall volume of the instrument.

Settings: 

0 – 127

Note Shift

Determines the amount (in semitones) by which the pitch of all notes is shifted.

Settings: 

-24semi – +0semi – +24semi

Tune

Determines the tuning of the MOTIF-RACK XS’s overall sound. You can adjust the tuning in cent 
increments.

Settings: 

-102.4cents [414.7Hz] – +0cents [440.0Hz] – +102.3cents [466.8Hz]

mLAN monitor 
(mLAN monitor switch)

Determines the audio signal flow for monitoring the sound when using the MOTIF-RACK XS with 
DAW software installed on a computer connected to the MOTIF-RACK XS via an IEEE1394 cable.

n

You will need to properly set up the DAW software in addition to making the settings here. For details, see the 
“Connecting to a Computer and MIDI device” on page 17.

Settings: 

stand alone, with PC, with PC (Mntr)

stand alone............ When this is selected, the audio signal of the MOTIF-RACK XS will be output directly via the OUTPUT L/

MONO and R jacks normally. This should be selected when you are using the MOTIF-RACK XS alone or 
are not using the DAW software even with a computer connected to the MOTIF-RACK XS via an 
IEEE1394 cable.

with PC .................. When this is selected, the audio signal of the MOTIF-RACK XS will be output to the DAW software on a 

computer via an IEEE1394 cable, merged and mixed with the DAW sound, returned back to the MOTIF-
RACK XS, then output via the OUTPUT L/MONO and R jacks. This should be selected when you are 
using the MOTIF-RACK XS as an audio device with the DAW software. Selecting this allows you to apply 
VST Effects within the DAW software to the MOTIF-RACK XS sound.

with PC (Mntr)........ The audio signal of the MOTIF-RACK XS will be output directly via the OUTPUT L/MONO and R jacks 

with the audio signal sent from the DAW software via an IEEE1394 cable. This should be selected when 
recording the MOTIF-RACK XS sound to the DAW software on the computer. Keep in mind that the Rec 
Monitor of the DAW software should be set to “off” in order to prevent “double” sound from occurring.

n

When “with PC” is selected, there may be a short delay between when you play an external keyboard and when 
you hear the resulting sound.

Power on Mode

This determines the default power-on mode (and memory bank)—letting you select which condition 
is automatically called up when you turn the power on.

Settings: 

multi, voice (USR1), voice (PRE1), voice (GM)

multi....................... When turning the power on next time, the Multi mode is entered and the first program number (USR: 

001) is selected automatically.

voice (USR1) ......... When turning the power on next time, the Voice mode is entered and the first program number of the 

User Voices (USR: 001) is selected automatically.

voice (PRE1).......... When turning the power on next time, the Voice mode is entered and the first program number of the 

Preset Voices (PRE1: 001) is selected automatically. 

voice (GM)............. When turning the power on next time, the Voice mode is entered and the first program number of the 

GM Voices (GM: 001) is selected automatically.

Layer 1-4 Parts 
(Layer 1 – 4 Parts Switch)

Determines whether or not the Part 1 – 4 voices of the selected Multi are sounded simultaneously as 
a single Part. If this parameter is set to “on,” the receive channels of the Parts 1 – 4 will automatically 
be set to the same value as the Receive Ch (Basic Receive Channel) parameter in the Utility Voice 
MIDI display of the Voice Mode. For details on the procedure, refer to the Quick Guide on page 40.

Settings: 

off, on

n

If this parameter is set to “on,” the actual “Receive Ch” settings of the Part 1 – 4 will not be updated from the last 
settings.

Utility Select window 

(when entering from the Voice mode)

Edit window 

(example: General window)

Содержание Motif-Rack XS























































































































Отзывы:

Нет отзывов

Похожие инструкции для Motif-Rack XS

BTC 5109C User Manual preview
5109C
Бренд: BTC Страницы: 2
Dareu A87 Series User Manual preview
A87 Series
Бренд: Dareu Страницы: 8
Waeco Magic Watch MWE-850-4DSM Installation And Operating Manual preview
Magic Watch MWE-850-4DSM
Бренд: Waeco Страницы: 204
Roland JX-10 Owner'S Manual preview
JX-10
Бренд: Roland Страницы: 73
Digital Gadgets digital basics 2-in-1 air keyboard HQ Quick Start Manual preview
digital basics 2-in-1 air keyboard HQ
Бренд: Digital Gadgets Страницы: 11
Schwinn 4IIII Install Manual preview
4IIII
Бренд: Schwinn Страницы: 8
SAI square Magic Tok Manual preview
Magic Tok
Бренд: SAI square Страницы: 17
KMC Controls KMD-5551E Application Manual preview
KMD-5551E
Бренд: KMC Controls Страницы: 58
Yamaha PortaSound PSS-15 Owner'S Manual preview
PortaSound PSS-15
Бренд: Yamaha Страницы: 4
Yamaha PortaSound PSS-14 (French) Mode D'Emploi preview
PortaSound PSS-14
Бренд: Yamaha Страницы: 4
Yamaha PortaSound PSS-125 Owner'S Manual preview
PortaSound PSS-125
Бренд: Yamaha Страницы: 4
Yamaha PortaSound PSS-110 Playing Manual preview
PortaSound PSS-110
Бренд: Yamaha Страницы: 7
Yamaha PortaSound pss-170 Owner'S Manual preview
PortaSound pss-170
Бренд: Yamaha Страницы: 16
Yamaha PortaSound PSS-260 Owner'S Manual preview
PortaSound PSS-260
Бренд: Yamaha Страницы: 20
Yamaha PortaSound PSS-130 Owner'S Manual preview
PortaSound PSS-130
Бренд: Yamaha Страницы: 12
Yamaha PortaSound PSS-120 Owner'S Manual preview
PortaSound PSS-120
Бренд: Yamaha Страницы: 12
Yamaha PortaSound PSS-160 Owner'S Manual preview
PortaSound PSS-160
Бренд: Yamaha Страницы: 20
Yamaha PortaSound PSS-190 (Japanese) Owner'S Manual preview
PortaSound PSS-190
Бренд: Yamaha Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды