Utility
MOTIF-RACK XS Owner’s Manual
103
Basic Structure
V
oice
Multi
Utility
Ref
erence
The Contr
ols &
Connector
s
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quic
k Guide
Appendix
Switch
Determines whether the Master Effect is applied to the Voice or not. When this is set to “on,” the
Master Effect will be applied.
Settings:
off, on
Type
Selects an Effect type. For details about the Effect type, refer to the “Basic Structure” on page 59.
Preset
This lets you call up pre-programmed settings for each Effect type, designed to be used for specific
applications and situations. You can change how the sound is affected by the selected pre-
programmed settings. For details about the pre-programmed settings of each Effect type, refer to
the separate Data List.
Effect Parameters
The Effect parameter differs depending on the currently selected Effect type. Refer to page 61 for
details about the Effect parameters. Refer to the separate Data List booklet for information on the
parameters for each Effect type.
8
Voice MEQ
This window lets you set Master EQ parameters in the Voice mode, allowing you to control EQ over five independent frequency bands. The
settings here affect all Voices. This window is available only when entering Utility from the Voice mode. The parameters are the same as
those in the MEQ display in Multi Common Edit (page 92).
9
Fctry Set (Factory Set)
You can restore this tone generator’s User memory (page 46) to the factory default settings (Factory Set). Please note that the setting of the
Power On Auto Factory Set on this window will be stored automatically by executing Factory Set. For instructions on executing Factory Set,
refer to the “Restoring the Initial Factory Settings” in the Quick Guide (page 48).
When you restore the factory default settings, the User memory data (all the User Voices, Multis, and system settings in the Utility
you created) will be overwritten with the factory defaults. Make sure you are not overwriting any important data. You should back up
any important data to your computer beforehand using the Bulk Dump function (page 47).
Auto Factory Set
(Power On Auto Factory Set)
When this parameter is set to “on,” turning the power on will restore the User memory to the factory
default settings. If you change this setting, make sure to execute the Factory Set function to finalize
the change.
Settings:
off, on
When setting Auto Factory Set to “on” and executing Factory Set, the Factory Set function will
automatically be executed each time you turn the power on. For this reason, this normally
should be set to “off.”
CAUTION
CAUTION
Содержание Motif-Rack XS
Страница 1: ...EN TONE GENERATOR OWNER S MANUAL ...