manualshive.com logo in svg

Yamaha Motif-Rack XS, Руководство пользователя

Yamaha Motif-Rack XS - универсальный синтезатор в формате раковины, предлагающий бесконечные возможности музыкального творчества. Проверьте Code List и скачайте руководство пользователя бесплатно на manualshive.com. Погрузитесь в мир звука с Yamaha Motif-Rack XS.

Поделиться
Скачать
background image

Storing the Edited Voice, Multi and Utility Settings

MOTIF-RACK XS Owner’s Manual

46

Basic Structure

Ref

erence

V

oice

Multi

Utility

The Contr

ols & 

Connector

s

Setting Up 

Listening to

the Sound

Connections

Using a Computer

Quic

k Guide

Appendix

The edited Voice, Multi and Utility settings can be stored in the internal Flash ROM (page 48). In addition, the Voice or Multi data 
currently being edited can be transferred to the external MIDI device or computer (DAW software) as bulk data (consisting of MIDI 
system exclusive messages) and saved as a file. 

Storing the edited Voice, Multi 
and Utility settings in the 
internal Flash ROM

The edited Voice, Multi and Utility settings can be stored by 
following the instructions below. If you want to change the name 
of the Voice or Multi, execute the Rename operation (page 47) 
before executing the Store operation. 

When you store the Voice or Multi, the destination data will be 
overwritten. Important data should always be backed up as an MOTIF-
RACK XS Editor file. 

1.

After editing is finished, press the [STORE] button. 

The Store window appears. 

n

Pressing the [STORE] button in the Utility mode will store the Utility 
settings immediately without any confirmation message. 

2.

Move the cursor position to the Bank column with 
the Cursor [

<

] button, then select the destination 

Bank with the Encoder knob, and move the cursor 
position to the Number column with the Cursor [

>

] 

button. 

This step is necessary only when a Normal Voice is edited 
in the Voice mode. 

3.

Select a destination Voice number or Multi number 
by using the Encoder knob. 

4.

Press the [ENTER] button or the Encoder knob to 
execute the Store operation. 

The display prompts you for confirmation.

Press the [ENTER] button or the Encoder knob to execute 
the Store operation. A “Completed” message appears 
when the data has been stored, and the destination Voice 
or Multi is shown in the display. 

n

To cancel the Store operation, press the [EXIT] button instead of the 
[ENTER] button. The Store operation will not be executed and the 
display returns to the original one. 

Never attempt to turn off the power while data is being stored 
(while an “Executing...” or “Please keep power on” message is 
shown). Turning the power off in this state results in loss of all user 
data. 

Storing the Edited Voice, Multi and Utility Settings

CAUTION

Example when a Normal Voice is selected

Voice Bank and Number as starting data of the Voice currently being edited 

Destination 
Voice Bank

Destination 
Voice Number

Voice name of destination

Store Compare function

When the Voice Store or Multi Store window is shown, the [EDIT] 
button’s lamp flashes and the “STORE COMPARE” appears in the 
display. In this status (referred to as “Store Compare mode”), you 
can hear the sound of the destination Voice or Multi by playing 
the Audition Phrase (page 16) or playing the connected external 
MIDI keyboard.

Pressing the [EDIT] button again exits from this status. 

CAUTION

Indicates that Store Compare is active. 

Содержание Motif-Rack XS























































































































Отзывы:

Нет отзывов

Похожие инструкции для Motif-Rack XS

Yamaha YPT-420 Manual preview
YPT-420
Бренд: Yamaha Страницы: 24
Yamaha Tyros4 Owner'S Manual preview
Tyros4
Бренд: Yamaha Страницы: 126
Yamaha Tyros4 Manual preview
Tyros4
Бренд: Yamaha Страницы: 102
Yamaha PSRE413 - KEYBOARD USB 100 PATTERNS Gebruikershandleiding preview
PSRE413 - KEYBOARD USB 100 PATTERNS
Бренд: Yamaha Страницы: 128
Yamaha PSR-I455 Reference Manual preview
PSR-I455
Бренд: Yamaha Страницы: 3
Yamaha PSR-E333 User Manual preview
PSR-E333
Бренд: Yamaha Страницы: 3
Yamaha PortaTone PSR-A3 User Manual preview
PortaTone PSR-A3
Бренд: Yamaha Страницы: 87
Yamaha PortaTone PSR-70 Midi Handbook preview
PortaTone PSR-70
Бренд: Yamaha Страницы: 16
Yamaha Portatone PSR-540 Manual De Instrucciones preview
Portatone PSR-540
Бренд: Yamaha Страницы: 161
Yamaha Portatone PSR-540 Owner'S Manual preview
Portatone PSR-540
Бренд: Yamaha Страницы: 160
Yamaha Portatone PSR-48 Owner'S Manual preview
Portatone PSR-48
Бренд: Yamaha Страницы: 45
Yamaha PSR-S650 Manual preview
PSR-S650
Бренд: Yamaha Страницы: 28
Yamaha PSR-E223 Data List preview
PSR-E223
Бренд: Yamaha Страницы: 3
Yamaha Tyros4 Connection Manual preview
Tyros4
Бренд: Yamaha Страницы: 22
Yamaha PortaTone PSR-640 Owner'S Manual preview
PortaTone PSR-640
Бренд: Yamaha Страницы: 188
Yamaha PSR-S710 Installation Manual preview
PSR-S710
Бренд: Yamaha Страницы: 32
Rapoo K2600 Quick Start Manual preview
K2600
Бренд: Rapoo Страницы: 18
Gigaware 26-985 Manual preview
26-985
Бренд: Gigaware Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды