manualshive.com logo in svg

Yamaha Motif-Rack XS, Руководство пользователя

Yamaha Motif-Rack XS - универсальный синтезатор в формате раковины, предлагающий бесконечные возможности музыкального творчества. Проверьте Code List и скачайте руководство пользователя бесплатно на manualshive.com. Погрузитесь в мир звука с Yamaha Motif-Rack XS.

Поделиться
Скачать
background image

MOTIF-RACK XS Owner’s Manual

104

Basic Structure

Ref

erence

V

oice

Multi

Utility

The Contr

ols & 

Connector

s

Setting Up 

Listening to

the Sound

Connections

Using a Computer

Quic

k Guide

Appendix

Appendix

Display Messages

Messages

Description

All data is initialized upon power-on.
Continue?

Confirms whether you want to execute a specified operation or not. If you press “YES,” turning the power on 
next time will reset all User data to the default initial settings (factory settings). 

Are you sure?

Confirms whether you want to execute a specified operation or not. 

Bulk data protected. 

Bulk data cannot be received because of the setting in the Utility parameters. For details, see page 100.

Completed.

The specified load, save, format, or other Job has been completed. 

Device number is off.

Bulk data cannot be transmitted/received since the device number is off.

Device number mismatch.

Bulk data cannot be received since the device numbers don’t match.

Executing...

Never attempt to turn off the power while data is being written to internal memory. Turning the power off in 
this state results in loss of all user data and may cause the system to freeze.

Illegal bulk data.

An error occurred while receiving the Bulk data or Bulk Request message.

MIDI buffer full.

process the MIDI data because too much data was received at one time.

MIDI checksum error.

An error occurred when receiving bulk data.

MIDI data error.

An error occurred when receiving MIDI data. Try again.

Mixing Voice full.

The Mixing Voice cannot be stored because the number of Voices already stored has exceeded the 
maximum capacity.

Now executing Factory set...

Indicates that the factory-programmed settings are currently being restored.

Now receiving MIDI bulk data...

Indicates that this instrument is receiving MIDI bulk data.

Now transmitting MIDI bulk data...

Indicates that this instrument is transmitting MIDI bulk data.

Please keep power on.

The data is being written to Flash ROM. Never attempt to turn off the power while data is being written to 
Flash ROM. Turning the power off while this message is shown results in loss of all user data and may cause 
the system to freeze (due to corruption of data in the Flash ROM). This may also result in the MOTIF-RACK 
XS being unable to properly start up the next time the power is turned on. 

The received MIDI bulk data’s type is 
not compatible with the current mode/
voice type.

This message appears when the MOTIF-RACK XS receives the bulk data for a mode different from the 
current mode. Set the MOTIF-RACK XS to the mode same as the one for the bulk data. (If the Bulk data is for 
the Voice mode, for example, set the MOTIF-RACK XS to the Voice mode.) 
This message appears also when the Voice type (Normal Voice or Drum Voice) of the bulk data is different 
from that of the currently selected Voice. Match the Voice type. 

The setting is available upon next 
power-on after storing Utility.

This message appears when the value of the IEEE1394 Driver parameter has been changed and stored, 
indicating that the setting will be active when the power is turned on next time. 

Содержание Motif-Rack XS























































































































Отзывы:

Нет отзывов

Похожие инструкции для Motif-Rack XS

Napoli NPL-TV 7874 DIGITAL Instruction Manual preview
NPL-TV 7874 DIGITAL
Бренд: Napoli Страницы: 20
C.Giant LP-6210B User Manual preview
LP-6210B
Бренд: C.Giant Страницы: 16
H&S XRT Pro Installation & Operation Manual preview
XRT Pro
Бренд: H&S Страницы: 32
Technics SX-KN470 Owner'S Manual preview
SX-KN470
Бренд: Technics Страницы: 76
Memorex MX2700 Series User Manual preview
MX2700 Series
Бренд: Memorex Страницы: 5
Zagg Basic 7in Manual preview
Basic 7in
Бренд: Zagg Страницы: 36
Razer HUNTSMAN V2 TKL Master Manual preview
HUNTSMAN V2 TKL
Бренд: Razer Страницы: 64
Nokia SU-42 User Manual preview
SU-42
Бренд: Nokia Страницы: 8
Nokia Power Keyboard SU-42 User Manual preview
Power Keyboard SU-42
Бренд: Nokia Страницы: 8
Brookstone 712984 Owner'S Manual preview
712984
Бренд: Brookstone Страницы: 12
Optek WKP-250 User Manual preview
WKP-250
Бренд: Optek Страницы: 6
EMS DK1 User Manual preview
DK1
Бренд: EMS Страницы: 25
Jawbone Up3 Charging Instructions preview
Up3
Бренд: Jawbone Страницы: 5
Franklin Dictionary & Thesaurus MWD-1470 User Manual preview
Dictionary & Thesaurus MWD-1470
Бренд: Franklin Страницы: 75
Techly ICTB1001 User Manual preview
ICTB1001
Бренд: Techly Страницы: 4
Pei tel PTCarPhone 3c Brief Instruction preview
PTCarPhone 3c
Бренд: Pei tel Страницы: 36
M-Audio KEYSTUDIO KeyStudio 49i Quick Start Manual preview
KEYSTUDIO KeyStudio 49i
Бренд: M-Audio Страницы: 12
I-Tech NK2e User Manual preview
NK2e
Бренд: I-Tech Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды