Yamaha MBK MW125 2014, Руководство по обслуживанию

Страница: 88 / 380

PERIODIC MAINTENANCE
3-7
2. Check:
• Cylinder head breather hose “1”
• Transmission case breather hose “2”
Cracks/damage
→
Replace.
Loose connections
→
Connect properly.
NOTICE
ECA21600
Make sure the cylinder head breather hose
and transmission case breather hose are
routed correctly.
3. Install:
• Storage box
• Center panel
Refer to “GENERAL CHASSIS (1)” on page
4-1 and “GENERAL CHASSIS (2)” on page
4-3.
EAS31017
CHECKING THE ENGINE IDLING SPEED
TIP
Prior to adjusting the engine idling speed, the air
filter element should be clean, and the engine
should have adequate compression.
1. Start the engine and let it warm up for several
minutes.
2. Check:
• Engine idling speed
Out of specification
→
Go to next step.
3. Check:
• ISC (idle speed control) learning value
“00” or “01”
→
Check the intake system.
“02”
→
Clean the ISC (idle speed control) unit
and throttle body.
Refer to “CLEANING THE ISC (IDLE SPEED
CONTROL) UNIT AND THROTTLE BODY”
on page 7-9.
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Connect the Yamaha diagnostic tool.
Use the diagnostic code number “67”.
Refer to “SELF-DIAGNOSTIC FUNCTION
AND DIAGNOSTIC CODE TABLE” on page
9-5.
b. Check the ISC (idle speed control) leaning
value.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
EAS31180
CHECKING THE THROTTLE BODY JOINT
AND INTAKE MANIFOLD
1. Remove:
• Storage box
Refer to “GENERAL CHASSIS (2)” on page
4-3.
2. Check:
• Throttle body joint “1”
• Intake manifold “2”
Cracks/damage
→
Replace.
Engine idling speed
1500–1700 r/min
1
2
Yamaha diagnostic tool
90890-03231
1
2