Yaesu FTDX-9000MP, Руководство по эксплуатации

Страница: 37 / 180

Page 35 FT
DX
9000MP O
PERATION
M
ANUAL
Clarifier Operation
When the [ CLAR
] switch (# ) is pushed, this knob may
be used to program an offset of up to ± 9.99 kHz from the
Main (VFO-A) frequency. This offset is only applied, how-
ever, to the receive or transmit frequency if the [
FAST/RX
]
key (# ) and/or [ BAND/MHz / TX
] key (# ), respec-
tively, have been pushed.
To apply the programmed frequency offset to the Receive
frequency, press the [
FAST/RX
] key momentarily. To re-
turn to the Main-VFO-A frequency, without the offset, press
the [
FAST/RX
] key once more.
To apply the programmed frequency offset to the Transmit
frequency, press the [
BAND/MHz / TX
] key momentarily.
To return the transmitter to the Main-VFO-A frequency, with-
out the offset, press the [
BAND/MHz / TX
] key once more.
To reset the Clarifier frequency to “0” offset, press the
[
B.MODE/CLEAR
] switch (# ).
BAND/MHz Up/Down Control
When the [ BAND/MHz
] key (# ) is pressed momentarily,
the Red LED imbedded in the switch will light up, and you
may then use this knob for selecting the desired Amateur
band. If you have engaged the “My Bands” feature via Menu
#140, this knob will select from among just the Amateur
bands that you have included in the “My Bands” list.
If you press and hold in the [
BAND/MHz
] key for 2 sec-
onds, the imbedded LED will glow Orange, and this knob
may now be used for rapid tuning in 1 MHz frequency steps.
Memory Channel/Memory Group Control
Pressing the [ MCH/GRP
] key (# ) momentarily will en-
able the use of this knob for selection of the desired Memory
Channel.
Pressing and holding in the [
MCH/GRP
] key for two sec-
onds will enable the use of this knob for selecting the de-
sired Memory Group.
F
unctions Associated with Sub (VFO-B) Operation
When the [
A/B
] switch (# ) is pressed, the Orange lamp to the right of the [
CLAR/VFO-B
] knob (# ) will light up, and this
knob will now be exercising control functions associated with the Sub (VFO-B) frequency control register. If the Orange lamp
is not illuminated, please press the [
A/B
] switch. Rotation of the knob will now control the Sub (VFO-B) frequency.
Sub (VFO-B) FAST Tuning
When the [ FAST/RX
] switch (# ) is pressed, the imbed-
ded LED will light up, and tuning of the Sub (VFO-B) fre-
quency will change to 100 Hz. Press the [
FAST/RX
] button
once more to return to the normal tuning rate.
Sub (VFO-B) BAND/MHz Up/Down Control
If you press the [ BAND/MHz / TX
] (# ) switch momen-
tarily, the imbedded LED will light up, and this knob may
now be used for selection of the desired Amateur band. Press-
ing the [
BAND/MHz / TX
] switch once again will cancel
Up/Down Band selection, and the LED will turn off.
If you press and hold in the [
BAND/MHz / TX
] switch for 2
seconds, the imbedded LED will light up, and this knob may
now be used for Up/Down tuning of the Sub (VFO-B)
frequency in 1 MHz steps. Press the [ BAND/MHz / TX
]
switch momentarily to cancel Up/Down tuning; the imbed-
ded LED will turn off.
Sub (VFO-B) Mode Selection
When the [ B.MODE/CLEAR
] switch (# ) is pressed, the
imbedded LED will light up, and this knob may now be used
for selection of the operating mode for Sub band (VFO-B)
operation. Pressing the [
B.MODE/CLEAR
] key once more
will cancel mode selection, and the imbedded LED will turn
off.
N N
N N N
O O O O OTE TE TE TE TE
:
Mode selection may also be accomplished by pressing the
[
B
] switch (# ), then pressing the appropriate Mode switch
(# ) to the left of the Main tuning Dial.
FFFFF
RRRRRONT ONT
ONT ONT
ONT
P P P P P
ANEL ANEL
ANEL ANEL
ANEL
C C C C C
ONTR ONTR
ONTR ONTR
ONTROLS OLS
OLS OLS
OLS
A/B Switch
The [ A/B
] switch controls the determines whether the
actions of the [ CLAR/VFO-B
] knob (#
, described
previously) will be applied to the Main band (VFO-
A) (“CLAR” option), or the Sub band (VFO-B)
(“VFO-B option”).
Pressing this switch once causes the Orange lamp to
the right of the [
CLAR/VFO-B
] knob to light up; in
this case, rotation of the [ CLAR/VFO-B
] knob af-
fects operation on the Sub band (VFO-B) (tuning, etc.).
Pressing the [
A/B
] switch once more causes the Or-
ange lamp to turn off; in this instance, rotation of the
[
CLAR/VFO-B
] knob affects operations associated
with the Main band (VFO-A) (Clarifier function, etc.).
A A A A A
D D D D DVICE VICE VICE VICE VICE
Functions Associated with Main (VFO-A) Control
In the case of Main (VFO-A) control, this knob is used for Clarifier tuning, as well as Up/Down selection of the Amateur band,
Memory Channels, 1 MHz tuning steps, or Memory Groups. For Main (VFO-A) control, be sure that the Orange lamp beside
this control is not illuminated. If the Orange lamp is turned on, press the [
A/B
] switch (# ) to turn it off.