Yaesu FTDX-9000MP, Руководство по эксплуатации

Страница: 133 / 180

Page 131 FT
DX
9000MP O
PERATION
M
ANUAL
MMMMM
EMOR EMOR
EMOR EMOR
EMORYYYYY
O O O O O
PERA PERA
PERA PERA
PERATION TION
TION TION
TION
M
OVING
M
EMORY
D
ATA TO THE
M
AIN
(
VFO-A
)
B
AND
You may transfer the contents of the currently-selected memory channel into the Main band (VFO-A) register, if you like.
1. Press the [ V/M
] switch, as necessary, to go to the
Memory mode. The memory channel number will ap-
pear in the multi-panel window.
2. Press the [ MCH/GRP
] key momentarily.
The Red LED inside the switch will light up, indicat-
ing that you are ready to recall a memory channel.
A A A A A
D D D D DVICE VICE VICE VICE VICE
:
If the Red LED imbedded in the [ MCH/GRP
] switch
does not light up, check to be sure that the orange lamp
to the right of the [
CLAR/VFO-B
] knob is not illumi-
nated. It it is, press the [ A/B
] switch to make it go out,
then press the [ MCH/GRP
] key again.
3. Rotate the [ CLAR/VFO-B
] knob to select the memory
channel the contents of which you wish to transfer to
the Main (VFO-A) band.
4. Press and hold in the [ M
X
A
] key for two seconds,
until you hear the double beep. The data in the se-
lected memory channel will now be transferred to the
Main (VFO-A) band.
[CLAR/VFO-B] Knob
[M X A] Switch [A/B] Switch [MCH-GRP] Switch
VDD TEMP SWR BIAS
[V/M] Switch
A A
A A A
D D D D DVICE VICE VICE VICE VICE
This transfer of data to the Main band (VFO-A)
does not affect the original contents of the memory
channel; this is a “copy” function that leaves the
memory contents unchanged.