Yaesu FTDX-9000MP, Руководство по эксплуатации

Страница: 41 / 180

Page 39 FT
DX
9000MP O
PERATION
M
ANUAL
Main (VFO-A) Band TX/RX Indicators
These combination lamp-buttons select and indicate
the transmit/receive status of the Main band (VFO-
A). When the green “RX” lamp is lit, the receiving
frequency is under control of the main knob and dis-
play (either VFO-A or a recalled memory channel).
When the red “TX” lamp is lit, the transmitting fre-
quency is under control of the main knob and display.
Thus, for “normal” (non-split) operation, both the red
and green lamps associated with the main tuning knob
will be illuminated.
Main (VFO-A) Frequency Display
This is the Main band (VFO-A) frequency display.
A A
A A A
D D D D DVICE VICE VICE VICE VICE
: When setting the CTCSS frequency for En-
coding or Tone Squelch operation, the tone
information will appear in this area during
setup.
Sub Band (VFO-B) TX/RX Indicators
These combination lamp-buttons select and indicate
the transmit/receive status of the Sub band (VFO-B).
Sub Band (VFO-B) Frequency Display
This is the Sub band (VFO-B) frequency display.
A A A A A
D D
D D
DVICE VICE
VICE VICE
VICE
: The Tone Encoder/Decoder frequency is in-
dicated during the setup process.
Multi-Panel
This field within the frequency display area provides
several indications, depending on the frequency con-
trol mode in use:
CLAR (Clarifier)
This window displays the Clarifier frequency offset
from the Main band (VFO-A) frequency. The Clari-
fier is engaged when the CLAR LED is illuminated.
MR (Memory Recall)
When the [ MCH/GRP
] switch (#
) is pushed, the
currently-selected Memory channel or Memory Group
number will be displayed in this window.
MT (Memory Tune)
If you rotate the [ Main Tuning Dial
] knob (“
) (or
change the mode) during memory operation, the trans-
ceiver will change into the “Memory tune” mode to
indicate that the memory contents have been tempo-
rarily changed; “
” lights up to confirm this change.
Repeater Shift Data
During FM operation, the Repeater Shift will be indi-
cated in this window.
A Negative frequency shift will be indicated by “-”
while a Positive frequency shift will be indicated by
“+” in the window. During Simplex operation (no
shift), “S” will be displayed.
FFFFF
REQ REQ
REQ REQ REQUENCY
UENCY
UENCY UENCY UENCY
D D D D D
ISPLA ISPLA
ISPLA ISPLA ISPLAYYYYY