Yaesu FTDX-9000MP, Руководство по эксплуатации

Страница: 130 / 180

Page 128 FT
DX
9000MP O
PERATION
M
ANUAL
M
EMORY
C
HANNEL
R
ECALL
1 Press the [ V/M
] key, if necessary, to enter the Memory
mode. A memory channel number will appear in the
multi-panel window.
2. Press the [ MCH/GRP
] key momentarily.
The Red LED inside the switch will light up, indicat-
ing that you are ready to recall a memory channel.
A A A A A
D D
D D
DVICE VICE
VICE VICE
VICE
:
If the Red LED imbedded in the [
MCH/GRP
] key does
not light up, check to be sure that the orange lamp to
the right of the [
CLAR/VFO-B
] knob is not illumi-
nated. It it is, press the [ A/B
] switch to make it go out,
then press the [
MCH/GRP
] key again.
3. After pressing the [ MCH/GRP
] key, you may rotate
the [
CLAR/VFO-B
] knob to select the desired
memory channel.
A A
A A A
D D D D DVICE VICE VICE VICE VICE
To work within a particular Memory Group, press
and hold in the [
MCH/GRP
] key for two seconds.
The imbedded LED will glow Orange; now press
the [
MCH/GRP
] key momentarily, and the LED
will change to Red; you mauy now choose the chan-
nel within the selected Memory Group.
[CLAR/VFO-B] Knob [V/M] Switch
[A/B] Switch
[MCH-GRP] Switch
VDD TEMP SWR BIAS
MMMMM
EMOR EMOR
EMOR EMOR
EMORYYYYY
G G G G G
RRRRROUPS OUPS
OUPS OUPS
OUPS