Yaesu FTDX-9000MP, Руководство по эксплуатации

Страница: 158 / 180

Page 156 FT
DX
9000MP O
PERATION
M
ANUAL
MMMMM
ENU ENU
ENU ENU
ENU
M M M M M
ODE ODE
ODE ODE
ODE
RX AUDIO G
ROUP
082. AGC-SLOPE
Function : Selects the gain curve of the AGC ampli-
fier.
Available Values : NORMAL/SLOPE
Default Setting : NORMAL
NORMAL: The AGC output level will follow a linear
response to the antenna input level, while
AGC is activated.
SLOPE: The AGC output level will increase at 1/10
the rate of the antenna input level, while
AGC is activated.
RX DSP G
ROUP
085. MAIN-CONTOUR-LEVEL
Function : Adjusts the parametric equalizer gain of
the Main band (VFO-A) receiver Contour filter.
Available Values : –40 ~ +20 dB
Default Setting : –15 dB
086. MAIN-CONTOUR-WIDTH
Function : Adjusts the Q-factor of the Main band
(VFO-A) receiver Contour filter.
Available Values : 1 - 11
Default Setting : 10
087.SUB-CONTOUR-LEVEL
Function : Adjusts the parametric equalizer gain of
the Sub band (VFO-B) receiver Contour filter.
Available Values : –40 ~ +20 dB
Default Setting : –15 dB
088. SUB-CONTOUR-WIDTH
Function : Adjusts the Q-factor of the Sub band (VFO-
B) receiver Contour filter.
Available Values : 1 ~ 11
Default Setting : 10
089. IF-NOTCH-WIDTH
Function : Selects the bandwidth of the DSP NOTCH
filter
Available Values : NARROW/WIDE
Default Setting : WIDE
IF
BANDWIDTH
“+” Gain
“Q”
“--” Gain
CONTOUR “G
AIN
”
AND
“Q”
NORMAL
Input Signal
A
u
d
io
O
u
tp
u
t
SLOPE
083. HEADPHONE MIX
Function : Selects one of three audio mixing modes
when using headphones during Dual Receive opera-
tion.
Available Values : SEPARATE/COMBINE-1/COM-
BINE-2
Default Setting : SEPARATE
SEPARATE: Audio from the Main (VFO-A) receiver
is heard only in the left ear, and Sub
(VFO-B) receiver audio solely in the
right ear.
COMBINE-1: Audio from both Main (VFO-A) and
Sub (VFO-B) receivers can be heard
in both ears, but Sub (VFO-B) audio is
attenuated in the left ear and Main
(VFO-A) audio is attenuated in the right
ear.
COMBINE-2: Audio from both Main (VFO-A) and
Sub (VFO-B) receivers is combined
and heard equally in both ears.
084. SPEAKER OUT
Function : Selects audio mixing modes for the “sub”
(secondary) speaker during Dual Receive operation.
Available Values : SEPARATE/COMBINE
Default Setting : COMBINE
SEPARATE: Audio from the Main (VFO-A) receiver
is fed to the main speaker, and sub
(VFO-B) receiver audio is fed to the
“sub” speaker.
COMBINE: Audio from both main (VFO-A) and Sub
(VFO-B) receivers is combined and split
equally between the main and sub
speakers.