Yaesu FTDX-9000MP, Руководство по эксплуатации

Страница: 162 / 180

Page 160 FT
DX
9000MP O
PERATION
M
ANUAL
MMMMM
ENU ENU
ENU ENU
ENU
M M M M M
ODE ODE
ODE ODE
ODE
130. SUB FIX 14 MHz
Function : Selects the scan start frequency of the FIX
mode Spectrum Scope while monitoring on the Sub
band (VFO-B) 20 m amateur band.
Available Values : 14000 - 14349 kHz (1 kHz steps)
Default Setting : 14000 kHz
131. SUB FIX 18 MHz
Function : Selects the scan start frequency of the FIX
mode Spectrum Scope while monitoring on the Sub
band (VFO-B) 17 m amateur band.
Available Values : 18000 - 18199 kHz (1 kHz steps)
Default Setting : 18068 kHz
132. SUB FIX 21 MHz
Function : Selects the scan start frequency of the FIX
mode Spectrum Scope while monitoring on the Sub
band (VFO-B) 15 m amateur band.
Available Values : 21000 - 21449 kHz (1 kHz steps)
Default Setting : 21000 kHz
133. SUB FIX 24 MHz
Function : Selects the scan start frequency of the FIX
mode Spectrum Scope while monitoring on the Sub
band (VFO-B) 12 m amateur band.
Available Values : 24800 - 24989 kHz (1 kHz steps)
Default Setting : 24890 kHz
134. SUB FIX 28 MHz
Function : Selects the scan start frequency of the FIX
mode Spectrum Scope while monitoring on the Sub
band (VFO-B) 10 m amateur band.
Available Values : 28000 - 29699 kHz (1 kHz steps)
Default Setting : 28000 kHz
135. SUB FIX 50 MHz
Function : Selects the scan start frequency of the FIX
mode Spectrum Scope while monitoring on the Sub
band (VFO-B) 6 m amateur band.
Available Values : 50000 - 53999 kHz (1 kHz steps)
Default Setting : 50000 kHz
TUNING G
ROUP
136. DIAL STEP
Function : Setting of the Tuning Knob’s tuning speed
on the SSB, CW, and AM modes.
Available Values : 1 / 5 / 10 Hz
Default Setting : 10 Hz
137. DIAL CW FINE
Function : Setting of the Tuning Knob’s tuning speed
in the CW mode.
Available Values : ENABLE/DISABLE
Default Setting : DISABLE
ENABLE :Tuning in 1 Hz steps on the CW mode.
DISABLE:Tuning according to the steps determined
via menu item 136:
DIAL STEP DIAL STEP
DIAL STEP DIAL STEP DIAL STEP .
138. 1MHz/100kHz SELECT
Function : Selects the tuning steps for the [ CLAR/
VFO-B
] knob when the [
BAND/MHz
] button is
pressed.
Available Values : 1 MHz/100 kHz
Default Setting : 1 MHz
139. AM CH STEP
Function : Selects the tuning steps for the
microphone’s [ UP
]/[
DWN
] keys in the AM mode.
Available Values : 2.5 / 5 / 9 / 10 / 12.5 kHz
Default Setting : 5 kHz
140. FM CH STEP
Function : Selects the tuning steps for the
microphone’s [ UP
]/[
DWN
] keys in the FM mode.
Available Values : 5 / 6.25 / 10 / 12.5 / 20 / 25 kHz
Default Setting : 5 kHz
141. FM DIAL STEP
Function : Setting of the Main Tuning Knob’s tuning
speed in the FM mode.
Available Values : 10/100 Hz
Default Setting : 100 Hz
142. MY BAND
Function : Programs a band to be skipped while se-
lecting bands using the [ CLAR/VFO-B
] knob.
Available Values : 1.8 ~ 50/GEN/TRV
To program the band to be skipped, rotate the [ CLAR/
VFO-B
] knob to recall the band to be skipped while
selecting bands via the [ CLAR/VFO-B
] knob, then
press the [ ENT
] key to change this setting to “ON.”
Repeat the same procedures to cancel the setting
(skipped “off”).
SCOPE G
ROUP